UNSOLVED

osprey4

updated

18 years ago

O

osprey4

6 Operator

•

34230 Posts

0

29873

April 21st, 2008 16:00

Suggested solutions for XP Autorun problem

I've seen three or four recent posts complaining of new systems preinstalled with Windows XP where the Autorun feature does not work. This occurs primarily with installation CDs. Autoplay does work.

After looking around, I've found the following ideas. Some of these have already been tried unsuccessfully. I will update this post if a consistent solution is reported.

1. As described here, uninstall PowerDVD 7, then reinstall it but do not install and patches.
2. Delete the upper and lower filters, using the Guided Help described in this article.
3. Try the Autoplay Repair Wizard.
4. Enable autoplay using TweakUI.
5. Make sure you are logged in as an administrator.
6. Try this registry edit (listed under Windows XP) or this other registry edit.
  • lakegeofan

    12 Posts

    619

    0

    Posted April 21st, 2008 18:00

    Osprey,

     

    As one of those afflicted with the autorun (or, lack thereof) issue, I thought I had tried all the various fixes mentioned both on this board and in my independent Googling.  I definitely had tried #2-6, several times each, in fact.

     

    Somehow though, in all my searching for other posts and threads connected to the autorun problem, I must have missed the one mentioning PowerDVD (#1.)

     

    So, just now I uninstalled the Cyberlink PowerDVD DX 7.0 Software that came preloaded on my new 530.  Once it was gone, I stuck in my Adobe Photoshop CD and it opened up immediately, ready to be loaded!

     

    So, I reloaded the PowerDVD disk that came with my new 530 (it's a black disk, revised Feb 2008).  Once that was installed, I tried my Photoshop CD again.  Nothing!  It was as dead as it's been since I got this new computer.

     

    So, I uninstalled PowerDVD again, and re-tried Photshop.  Again, it automatically opened, ready to be installed.

     

    So, for the true acid test, I then got out an old PowerDVD disk that had come with my previous Inspiron 530, and I tried that.  (That older disk is blue and it's dated November 2006.)

     

    Next, I stuck my Photoshop CD back in and it opened up aotomatically!  EUREKA!!  I tried a few other software disks, and they all opened automatically as well.

     

    So, obviously something in the revisions of PowerDVD has changed the abilty of software disks to open automatically.  Possible that's an enhancement or correction of some kind, but it bugged me big time!

     

    My problem seems to be cured!!  Many many thanks for hanging in there!

     

  • The_Namek

    2 Intern

    •

    2794 Posts

    620

    0

    Posted April 21st, 2008 18:00

    lakegeofan,

    Would you try something? Reinstall PowerDVD DX 7.0 then check the Startup tab in msconfig to see if it has a checked listing there. If the program is enabled in startup then disable it & try an application CD again after rebooting to see if it'll autorun. 

  • The_Namek

    2 Intern

    •

    2794 Posts

    620

    0

    Posted April 21st, 2008 22:00

    Nice! Thanks. A quick Google search revealed that PDVDDXSrv is a UPNP Media server added by the Cyberlink PowerDVD. Certainly nothing that needs to be running at startup or that will interfere with the software's normal use.
  • lakegeofan

    12 Posts

    620

    0

    Posted April 21st, 2008 22:00

    The_Namek,

     

    Ok, here you go- - -

     

    1.  I uninstalled the old (blue 11-06) PowerDVD program. 

    2.  I put in the new (black 2-08) PowerDVD DX disk, which autoran when I placed it in the drive.

    3.  I went into run/msconfig/startup.

    4.  PowerDVD was there (shown as PDVDDXSrv) and it was checked.

    5.  I unchecked it, and hit apply.

    6.  I rebooted.

    7.  Upon reboot, I tested with my Photoshop CD, and it started right up and autoran.

     

    So, it appears that the newer Power DVD program can be used, but it needs to be disabled at start-up?

     

    Hope that helps!

     

     

  • osprey4

    6 Operator

    •

    34230 Posts

    620

    0

    Posted April 21st, 2008 23:00

    Wow, sometimes the shotgun approach actually does work.
  • saz25

    21 Posts

    620

    0

    Posted April 22nd, 2008 00:00

    Thanks folks for all the help. I also de-installed PowerDVD that came with my T7400 and sure enough, autorun works !

     

    I haven't reinstalled it yet, but I will now that I understand that a startup/msconfig change should resolve the issue..

     

    Some additional info, the version of PowerDVD that was installed on my PC by Dell was 7.0.3710.

     

    Another question before I reinstall it. If I unchecked the startup app in msconfig, but then later start the PowerDVD manually to create a DVD, etc., would that mess up autorun ,thus requiring the msconfig change again and everytime I start/run PowerDVD?

     

    Thanks,

    Steve

    P.S.: I love this forum

  • osprey4

    6 Operator

    •

    34230 Posts

    620

    0

    Posted April 22nd, 2008 09:00

    Steve:

     

    To answer your question, no, it should not. Only Quicktime has this "feature" of adding itself back into the start-up list.

  • saz25

    21 Posts

    620

    0

    Posted April 22nd, 2008 10:00

    osprey4, thanks.

    What exactly is this app, PDVDDXSrv, used for? Just curious.

    Thanks,

    Steve

  • The_Namek

    2 Intern

    •

    2794 Posts

    620

    0

    Posted April 22nd, 2008 15:00

    Steve,

    As I mentioned in my last post yesterday, it's a UPNP Media server added by Cyberlink PowerDVD.

  • MelissaM612

    1 Message

    107

    0

    Posted May 29th, 2008 17:00

    Aaargh!  I just spent an hour chatting with support online and they didn't have me check any of these things. He ended up telling me that that's just the way my DVD player works.  Since I had already done my own searching prior to the chat and had checked things like whether I had administrator rights, checking the registry, etc.  I really didn't believe him. He only had me run diagnostics and then check to see that there wasn't a question mark in Device Manager.

     

    Thankfully I checked here next and found this thread.  It was the Power DVD that was messing up my autorun and now all is well.  Thank God.  I feel like I just lost three hours of my life. :smileysad:

     

    Next time somethings wrong maybe I'll come here first. :smileyhappy: