When I purchased the machine about a year ago, I wanted to add two more hard drives.
I noticed that for some reason the 5150 only had two SATA sockets, so I had to settle with adding just one new internal drive and an external drive.
During the last 12 months, 3 external hard drives failed (Maxtor, Seagate and WD), usually by ending there lives making grinding noises followed by becoming unrecognisable to my computer.
Needless to say I have lost faith in external hard drives.
Anyway, I really need to add a third hard drive, and I am now wondering if I can simply add a third one to an IDE cable.
My questions are:
How do I attach a hard drive in an optical drive bay?
Can I use any available IDE socket and power socket?
Do I set the jumper on the new hard drive to slave? (a friend of mine said it will have to be set to primary), but that makes no sense to me because my primary drive is SATA and obviously has the OS on it…. Surely I won’t have two primary hard drives.
Do I need to touch BIOS?
Can the 5150 handle 3 hard drives? (currently installed = 1 x 250GB & 1 x 300GB)
2. Can I use any available IDE socket and power socket?
in a typical setup, the hard drives that are already installed on the computer are set as auto select or cable select, so you can just connect it to any available IDE socket and power socket.
you wont have to be confused wether to set it as slave or primary.
3. Do I need to touch BIOS?
yes because you need to check if the hard drive is detected. or you can reset its configuration just to let it detect the new hard drive.
4. Can the 5150 handle 3 hard drives? (currently installed = 1 x 250GB & 1 x 300GB)
it can handle 4. given that there are no cd/dvd drives on the computer and you can use the 2 IDE cables. but the problem is the hard drive would not fit on the CD/DVD slot
To install a 3.5" hard drive in a 5.25" bay, you could use a set of drive adaptor brackets, similar to
these.
Bev.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
I seem to have a similar kind of proble, though I don't quite follow all of thism especially the optical drive stuff. I have an E520, and I want to add in an extra hard drive, now it looks like my motherbored has 4 SATA ports, but two of them don't seem to do anything. I searched on the internet to find out what an IDE port looks likem and I don't seem to have any. Can I make these two other SATA looky likey ports work, or do I need to buy a new motherboard. Thanks
The E520 systems does not support IDE drives, only SATA, the motherboard has one floppy drive connector.
Yes, you should be able to use an open SATA connector on the mtherboard.
This may help you, to install an additional SATA hard drive in the E520.
Basically all you need, besides the SATA hard drive, is a 24" [or longer] x 180* x 90* [right angle] SATA data cable, similar as the unit
here.
Try to buy the cable from a local computer store, to save the S&H.
In order for windows to recognize the second hard drive, it must be patitioned and formatted. These are generic instructions for installing an additional hard drive using Windows XP Disk Management, they are by
Seagate. but apply to all brands.
Bev.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
butete
19 Posts
488
0
Posted October 12th, 2007 14:00
basically, you cant.
to install or replace a hard drive visit this.
http://support.dell.com/support/edocs/systems/dim5150/en/sm/parts1.htm#wp1366406
to install an optical drive visit this :
http://support.dell.com/support/edocs/systems/dim5150/en/sm/parts1.htm#wp1367033
2. Can I use any available IDE socket and power socket?
in a typical setup, the hard drives that are already installed on the computer are set as auto select or cable select, so you can just connect it to any available IDE socket and power socket.
you wont have to be confused wether to set it as slave or primary.
3. Do I need to touch BIOS?
yes because you need to check if the hard drive is detected. or you can reset its configuration just to let it detect the new hard drive.
4. Can the 5150 handle 3 hard drives? (currently installed = 1 x 250GB & 1 x 300GB)
it can handle 4. given that there are no cd/dvd drives on the computer and you can use the 2 IDE cables. but the problem is the hard drive would not fit on the CD/DVD slot