Hello, I have a problem that I have been working on for five days. I have read all the forums and tried all the previously suggested fixes and all this to no avail.
I installed a second hard drive last week and formatted it etc etc. It was working fine for about three days. Suddenly one morning I could not re-start the comp. I get the message NTLDR is missing ....press cntrl alt delete to restart. I do this and get the dell window which takes me no where either. I have tried f2 key and reformatted how it re-boots, I have tried clearing the NAVRAM at set up, I have tried to reboot from the cd drive using my windows CD to try to reinstall missing programs. The cd drive also just gets me the same results, primary drive not found secondary drive not found, pres f1 to restart or f2 for setup, nighter of the two options works. f1 just tells you NTLDR is missing and to restart, and f2 takes you to set up, which if you try to exit set up, it brings you to the same primary drive missing etc etc hit f1 or f2 and again to ntldr is misisng. HELP! I can't imagine what else to do. I have checked all connections, and all calbes are nice and firm. I replace the calble to the drives to insure that it wasn't the problem and sure enough no fix! Thanks for any replies. Kind regards from sunny Malibu, California
Thanks for your kin replies. I did do all of the things you suggested. Still can't get it working. I am on the phone now with microsoft to see if they can help. Thanks again!
shaggy303
20 Posts
295
0
Posted May 20th, 2004 19:00
Check the cables on the hard disk drives (hdd)
Make sure the jumper settings are correct
Make sure they are active in BIOS (Setup)
Check your CD drives too it should be able to boot to it
Listen to the computer can you hear the HDD spin when you turn it on
Do you get any lights for the drives HDD or CDD (does the tray open)
If the ribbon cables are connected check the power leads try different power leads
Remove the added HDD make sure the power supply can handle all of the devices in the system