You may have trouble imaging the Media Direct partition. If you mean to image across machines, UNINSTALL the video drivers BEFORE you try imaging - if you try to boot an image with ATI drivers on a system with an nVidia card, it will almost certainly fail.
What do you mean by trouble with the DELL media direct partition? I've backup up all partions individually as well as as a COMPLETE drive backup to a USB HD.
I understand that the partition table may change or not copy identically, I have had this problem (see my other posts on partions and losing my DELL MEDIA DIRECT functionality.) but I have been able to fix it using a link to the DELL utilty to repair it.
I believe I also saw instructions on how to create it on another web page that was VERY insightfull. I suppose I could just leave the partion open on the drive and "fix it later" using the above methods.
Also, am I correct to assume that VISTA will automatically load the drivers for video when I reboot the system? How would I keep that from happening, and use a generic video driver so when I image the GeForce Laptop with vista, it only copies the generic drivers? Will it allow me to NOT load the drivers or let me cancel the install of the appropriate drivers?
Thanks for the tip on the video drivers!:smileywink:
If you've repaired the mediadirect partition, that should not be a problem. Do not assume the system will pick up a new video card - UNINSTALL all the video drivers BEFORE imaging, leaving default Windows drivers. Then try the image, booting up and installing drivers on the new hardware. You are courting disaster if you leave the ATI drivers loaded and expect to be able to load the nVidia ones - and you will not be able to uninstall the ATI drivers easily in the system without an ATI card.
"If you've repaired the mediadirect partition, that should not be a problem."
Got it.:smileywink:
"Do not assume the system will pick up a new video card - UNINSTALL all the video drivers BEFORE imaging, leaving default Windows drivers."
Understood, but my question is does VISTA unload the unwanted drivers right away or does it contiue to use the current ones until you reboot? (My experience says it will use the current drivers until you reboot). The question then becomes, if I reboot, how do I keep VISTA from reloading the drivers automatically?
"Then try the image, booting up and installing drivers on the new hardware. You are courting disaster if you leave the ATI drivers loaded and expect to be able to load the nVidia ones - and you will not be able to uninstall the ATI drivers easily in the system without an ATI card."
Understood! Thank you for the info!:smileyhappy:
PS. The system with the OEM VISTA (non-upgrade) has the NVIDIA card, my system has the ATI, that I want to image the OEM VISTA drive to. Same differrence I'm sure!
ejn63
11 Legend
•
87469 Posts
•
321256 Points
393
0
Posted April 25th, 2007 15:00