I want to add on another Hard Drive to my new Dimension3000.
I'm not oo sure if I can just throw it in the case and it will start working, or if I need to do anything special..?? I don't want to compromise the files I already have on my Dell Factory Drive, but I need to install this other drive so I get the data off of it and put onto my new PC...
Can anyone walk me through this please?
The drive/(s) I want to add are:
Maxtor Model: 81630A4
(1620 MB IDE HD)
and
Caviar Model: WDAC31000-00H
(1083.8 MB)
Could someone please help me??
I don't even really need to keep them installed, I just want to have them connected long enough to transfer the data that I have on them....
If you want to permanently mount it, you'll need a dual drive cable and bracket from Dell (there's only a single drive bracket and cable in there now).
If it's just temporary, you can disconnect the CD-ROM drive, jumper the old drive as cable select and install it long enough to copy what you need.
I recently added a new HD to my Dell Dimension 4100. The next website was very helpful; if you don'n need to copy all the contents in your old HD to the new one then you can probably ignore the parts dealing with Norton Ghost.
that sounds pretty easy except for thye cable select part...
The way I understood that was...
if it's only temporary (which it is),
I can disconnect one of the DVD Drives, and hook up my old hard drive the same way the DVD drive was hooked up? Same connections and everything??
Do i need to "add new hardware" or anything like that, and is this going to affect my DVD drive when I go to re-connect it, when I'm done with the Hard drives??
Thanks so much for your help, this site is a great resource for rookies like me....
ejn63
11 Legend
•
87469 Posts
•
321256 Points
170
0
Posted October 30th, 2004 09:00
If it's just temporary, you can disconnect the CD-ROM drive, jumper the old drive as cable select and install it long enough to copy what you need.