UNSOLVED

Fred-from-NYC

updated

21 years ago

0

476

March 31st, 2006 02:00

DVD drives no longer in BIOS or Windows

I have a Dimension 8400 that came with one SATA hard drive, a DVD-ROM drive and a DVD-RW drive. I added a second SATA hard drive and then proceeded to partition and format the hard drive with the Disk Management of Windows XP (All Programs - Administrative Tools - Computer Management - Disk Management). When I was asked to assign a drive letter Windows suggested F: (C: was the old hard drive, D: and E: the two DVD drives). I canceled and changed E: to F: and D: to E: so that I could select D: for the second hard drive. After I had formatted the new hard drive I restarted the computer but now the two DVD drives are no longer recognized by the BIOS. They also don't show up in Windows. The two hard drives work fine. I disconnected the new hard drive and reset the BIOS to the default values but I still don't see the DVD drives, neither in the BIOS nor in Windows. What can I do to get the DVD drives back?
  • 85

    0

    Posted March 31st, 2006 04:00

    Problem solved. I disconnected the two DVD drives, disabled the PATA adapters in the BIOS and shut the computer down. Then I connected the master DVD drive, enabled it in the BIOS and it showed up in Windows. I shut the computer down, connected the slave DVD drive, enabled it in the BIOS and now I had both DVD drives in Windows, plus the original hard drive. I shut the computer down and connected the second hard drive, enabled it in the BIOS and logged on to Windows. I have now both hard drives and both DVD drives.
  • Predator

    2 Intern

    •

    15286 Posts

    85

    0

    Posted March 31st, 2006 09:00




    Good work Fred and thanks for the feedback, may help the next Member that visits.

    Best Regards!





    God, grant me the senility to forget the people I never liked anyway,
    the good fortune to run into the ones I do and the eyesight to tell the
    difference.



    CD/RW Link