We have to Convert Dell PowerEdge T560 to Rack Mode and put it into rack. For install rails, I removed the system feet.
To remove system top cover, I removed the front IO module. I couldn't find any screw and tried to push the cover in back direction, but it doesn't work. I did show 2 latches above front IO Mode, but I can not move it.
My question: 1. Can the system top cover be removed for converting into Rack mode? 2. Do I need to use special tools
to remove the system top cover? By the way I know that the T640 is possible to be converted to rack mode(The system top cover is easy to be removed). Thanks.
The tower systems traditionally come in a rack chassis or tower chassis. They really arent designed to be converted from one to the other. I have not personally seen the T560, so I dont know for sure what can be done to it, but I would be very surprised if you could actually fit Dell rails onto it. What we did in our lab in the past, was we would remove the feet, then buy a tray style rack mount kit, then we could slide the tray in and out of the rack when we needed to work inside the system. if we ever needed to be a tower again, we would just add the feet back on.
DELL-Young E
Moderator
•
5421 Posts
•
37 Points
0
0
Posted April 1st, 2025 04:04
Hello,
Please visit https://www.dell.com/community/en/direct-messaging
In the meantime,
But T560 no such options :
https://i.dell.com/sites/csdocuments/shared-content_data-sheets_documents/en/poweredge-t640-spec-sheet.pdf
https://www.delltechnologies.com/asset/pl-pl/products/servers/technical-support/poweredge-t560-spec-sheet.pdf
You cannot use any conversion kits, I'm afraid.
Respectfully,
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!