UNSOLVED

sphinx9999

updated

20 years ago

S

sphinx9999

24 Posts

0

9868

January 17th, 2007 00:00

Dell 1710 miscellaneous questions

I haven't seen answers to these questions here (or most anywhere) so hopefully someone can help!

1. The 1710 comes standard with 16MB RAM for my model. There is a 128MB upgrade. What is this memory used for? Caching fonts? Working with image data? Under what printing conditions should/would this improve performance?

2. Supposedly this printer has a power save mode... how can I determine how long it takes before it goes into its sleep mode? Can this be adjusted?

3. The printer's "quality" settings include a feature to turn on (or off) something called PictureGrade. It's just a checkbox. What is this feature?! Should it be on or off?

4. Any kind of images printed by this printer come out terrible. They're streaked and the 1710 doesn't seem to translate color imagery gray scale dither patterns very well, versus other printers I've worked with over the years.

Thanks!
  • 191

    0

    Posted January 17th, 2007 12:00

    I can help you with #2. One of my clients has been complaining about how long it takes to print - we counted 30 seconds yesterday from click to start up. I uninstalled the ink monitoring software and it started in 5 seconds. We ordered a couple of toner cartridges so we won't be caught short, but that's way too much of a nuisance!
     
     
  • sphinx9999

    24 Posts

    191

    0

    Posted January 18th, 2007 03:00

    Thank you!
     
    I figured out some answers on my own thanks in part to google searches and some reading up on this board.
     
    #1 - still have no idea
     
    #2 - the local printer configuration utility has an option to enable mouse-over help and there is a screen in there that lets you set the powersave mode timeout and describes the units in which it's set (minutes).
     
    #3 - Picturegrade seems to be some algorithm for improving picture quality.  it works reasonablly well.  I foundt his in a Lexmark manual.
     
    #4 - turning on the 2400 IQ and PictureGrade helps a lot.  At least now the pictures are even within the ballpark as far as overall lighting is concerned.  The printer still streaks a ton.  It seems inappropriate for any printing that involves patterned objects... text and stick figure-type diagrams only.  Hopefully someone has some further suggestions!
     
    Couple of other quirks I've noticed... the printer makes a whirring sound every 30 minutes or so that's somewhat freaky, at least in powersave mode.  It's freaky because it just comes out of nowhere and scares you.  Also, I'm still trying to figure out how to print gridlines in Excel.  Apparently this printer won't print them, at least not in the HQ dpi modes.