What's the difference between the "3000cn" that Dell has sold for a long time, and the "3010cn" printer that recently appeared on their website?
Also, is there going to be a 3110cn replacing the 3100cn? I am starting to see documents on Dell's website related to a "3110cn" printer. E.g. http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?docid=0E92C191C6E63C9EE0401E0A54172280&c=us&l=en&s=gen
There are even links to a 5110cn, presumably a replacement to the 5100cn. Any insight?
The 3100 is basically the same printer with 3 major differences:
1. it has a second paper drawer below the MFT, which is NOT OPTIONAL,
it MUST be attached or the 3100 will not print.
2. it has a built in ethernet port to be used as a stand-alone network printer
(however since you can't change paper sizes without making changes to both
the printer drivers and AT THE PRINTER ITSELF, this is somewhat less useful.
3. the 3100cn comes with and uses full filled 4000 page toner carts, the 3000 uses
carts that are rated for 2500 pages, essentially they are half filled carts with
Dell making just enuf of a physical change to block 3000 users from using full filled carts.
When on sale the 3100cn can be had for barely more than $100 extra and pays for itself in just using the
bigger initial carts... the 3000 is a 's*cker purchase'.
Thanks, Couperin. Yeah, I understand the difference between the 3000cn and 3100cn -- in fact, I figured out that the difference in the amount of toner shipped with the printer is alone worth the price difference (often a small difference). Still, your explanation was helpful. The 3000cn is nowhere near the value that the 3100cn is, and the price difference is often tiny.
I was actually asking about the 3000cn and the newly-released 3010cn -- whether there is some kind of across-the-board update, since it *seems* like the 3100cn is morphing into the 3110cn (see link above). Basically, I am wondering what the "+10" is getting you -- i.e. whether I should wait until the 3110cn rather than buy a 3100cn at discount right now.
Since you mentioned it, the main obstacle to me buying a 3100cn is the size of the machine -- I wish the lower paper tray could be removed. I've heard before, as you said, that it cannot be. If the 3110cn is identical to the 3100cn, but with the paper tray detachable, I will buy it in a heartbeat. I'll even pay a few bucks more for this "feature"!
I realized what u were asking after I replied.
The specs simply don't show any meaningful difference with the new models.
I SUSPECT therefore they are firmware and minor engine updates.
Normally I would suggest simply calling and asking, but DELL has been pathetic in this regard concerning these printers. They know NOTHING about them and any technical questions asked about them are met with either the clueless person at the other end clearly fumbling thru a manual they have never read, or you get a "we'll get back to you on that one"...and they never do.
Hopefully if there are minor fixes it will be to the big 3 issues:
1. the ability to print envelopes correctly without mangling them
2. the ability to print without skewing the paper
3. the ability to change paper sizes easily and via software without having to drill down thru the menus on the printer itself
Frankly I don't get the size complaint.. the footprint is identical, the only difference is the height of the printer and it only adds 4"... are you all working in offices with 6 ft ceilings ?? If they would fix 1 thru 3 I bet most 3100cn owners would gladly take a machine that's taller.
BTW some other observations:
1. many want to use these with heavier stock, the total lack of an alternate straight-thru paper path makes that impossible... unfortunate.
2. the 3100cn has a non-OEM toner option buried deep in the menus, this allows refill of the toner carts. Since the carts are chipped, the practical result is once this option is selected the software no longer monitors toner levels, but the printer DOES print. This can ultimately make the 3100cn an extremely frugal choice. I wouldn't be suprized if one of the 3010cn revisions is that this option disappears... good luck getting Dell to respond to a question about this...but I'm sure we'll get a response from a user...
Thanks again for the helpful info. The hidden option for using refilled cartridges is nice to know.
On the size issue, it normally wouldn't matter to me (I have 8-foot ceilings! :=) but the printer will be placed in an area below my desktop, on a slightly elevated platform (just the way my desk is). With this little platform, the tabletop thickness, etc., I have about 22 inches of vertical space. While the 3100cn (at 21 inches) will physically fit, it will be difficult to access printouts, with only 1" of clearance. The 3000cn (at 17 inches) will probably be a lot better. So that's my reason for objecting to the size (the non-detachable paper tray, in particular). I agree it should not be a huge issue for most people, though.
OK looking at what details they give us, looks like the basic engine has definitely been revised: not only are the dimensions of the unit different but now the standard toner carts are rated 5000 pages for black and 4000 for the colors, and there are new high capacity 8000 page toner carts as an option. One can hope that in revising the handling they have improved the paper and especially the envelope handling (unless this new model makes envelopes burst into flames it can hardly handle them any WORSE than the 3100...)
The big issue is then: did they revise the firmware to make the friggin thing less braindead. Can it now actually be controlled for simply changing things like paper size and type from your computer without this "now go to the printer and drill down into the memus to match exactly what you just told it via the software or it's just going to sit there and beep 'mismatch' at you like a lobotomized child".
Coup47
36 Posts
704
0
Posted May 15th, 2006 23:00
1. it has a second paper drawer below the MFT, which is NOT OPTIONAL,
it MUST be attached or the 3100 will not print.
2. it has a built in ethernet port to be used as a stand-alone network printer
(however since you can't change paper sizes without making changes to both
the printer drivers and AT THE PRINTER ITSELF, this is somewhat less useful.
3. the 3100cn comes with and uses full filled 4000 page toner carts, the 3000 uses
carts that are rated for 2500 pages, essentially they are half filled carts with
Dell making just enuf of a physical change to block 3000 users from using full filled carts.
When on sale the 3100cn can be had for barely more than $100 extra and pays for itself in just using the
bigger initial carts... the 3000 is a 's*cker purchase'.