UNSOLVED

AndyB98

updated

3 years ago

A

AndyB98

1 Rookie

•

10 Posts

0

1299

January 25th, 2020 08:00

Upgraded CPU's in T5600 and am getting a warning on boot about the PSU?

I have just upgraded a T5600 from single Xeon E5-2603 to dual Xeon E5-2665's.  Now when I boot the PC I get a warning about the PSU not supporting the recent changes and can press F1 to continue, which works and the PC boots into Windows 10 and as far as I can tell is operating OK.

The PSU is 850W which I think is the biggest available for the T5600 isn't it?

I am keen not to break it...

Cheers

Andy

  • 1013

    0

    Posted January 25th, 2020 23:00

    Check your BIOS settings. If that doesn't help you might try to back out your 2 CPU upgrade and just add the 1 CPU change, reboot the system and get it stable before adding the second CPU. Not familiar with the specs on the T5600 as I have the T7500 but that might help. Specs show the E5-2603 @ 80 watts and the E-2665 @ 115 watts and you added a second cpu - that's a 280 watt difference. Not a problem for the PSU but the system my see it as a power overload initially. may have to reset something in the BIOS.  

  • AndyB98

    1 Rookie

    •

    10 Posts

    1009

    0

    Posted January 26th, 2020 02:00

    Thanks or the reply.  I updated the BIOS to the latest A19 release and I have been through all the settings but I can't find anything power related.  I haven't done a factory reset of the BIOS settings though.

    I am not sure about your maths with regards to the power usage (although I may be misunderstanding?)  115 * 2 = 230.  The original CPU was 80W, the two new CPUs are 230 (115 * 2) so I 230 - 80 = 150.  So thats a 150W difference not 280?

  • Wallyworld2021

    1 Rookie

    •

    2 Posts

    663

    0

    Posted June 1st, 2021 17:00

    Did you resolve this?

     

    I tried upgrading to dual e5-2680s and it will boot fine with 1 (same warning) but will not boot with both installed 

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    653

    0

    Posted June 1st, 2021 18:00

    Were any GPU wattage(s) taken into account?

  • Klitter

    3 Posts

    0

    0

    Posted January 5th, 2024 00:37

    A 1100/1400Watt PSUs existed. Their prices were ridiculous at the moment. I've ran a pair of 2689 for years with that PSU. On Geekbench they perform better in multi than my Ryzen5 5600.

  • Klitter

    3 Posts

    0

    0

    Posted January 5th, 2024 00:38

    @bradthetechnut​ it's not GPU related. I put there a R9 290 and no warning appeared.

  • Klitter

    3 Posts

    0

    0

    Posted January 5th, 2024 00:38

    @Wallyworld2021​ Top CPU setting is 2x E5 2660