As I recall, there is no configuration menu in system BIOS for bifurcation, only the PCIe gen and link speed. I doubt that the settings was the issue because you could see the drives in Windows. Try Live CD or unformatted (unallocated) drives.
If you read some similar posts, you will see the common mistake was the issue, not the hardware problem. Go over your setup, sometimes we can overlook the very basic things in the process.
This is both a bump and a clarification: What bios settings must be changed for the bifurcation to work. I have two nvme ssds in my dell ultraspeed quad card, and the drive is recognized by Windows (but not readable as its an ext4 partition) and when I boot to ubuntu, the drive would be readable if the system recognized it, but its not.
Thanks Chino de Oro. After noodling around a bit I think i found the issue. The drive was recognized by Ubuntu but not mounted. So lsblk to find the device and mount to mount it.
I'm curious if the nvme bifurcation ability in this workstation is somehow hard-locked to only work with Dell Ultraspeed nvme controllers.... I ask because I have a different brand quad-nvme controller which works fine in my windows desktop (i.e. I can see/access all 4 drives independently), but when I put it in my Dell workstation, only the first nvme drive shows up, the other 3 do not... which is exactly what happens when plugged into a motherboard which does not support bifurcation. If the functionality is not hard-coded to only accept dell nvme controllers, what else might be causing the remaining 3/4 drives to not show up? is this function limited to any specific pci-e ports?
Re: I'm curious if the nvme bifurcation ability in this workstation is somehow hard-locked to only work with Dell Ultraspeed nvme controllers....
I don't think it's hard-locked. I've tested different brands of adapter, i.e. Asus Hyper V.2 and they worked just fine. Just make sure that you install it on a PCIe x16 slot.
You may consider to create a separate thread to gain attention as this closed topic was for bifurcation of Dell Ultra-Speed Quad on a T7910 workstation.
Chino de Oro
11 Legend
•
8554 Posts
•
47161 Points
970
0
Posted August 30th, 2022 19:00
As I recall, there is no configuration menu in system BIOS for bifurcation, only the PCIe gen and link speed. I doubt that the settings was the issue because you could see the drives in Windows. Try Live CD or unformatted (unallocated) drives.
If you read some similar posts, you will see the common mistake was the issue, not the hardware problem. Go over your setup, sometimes we can overlook the very basic things in the process.