I have PE2900 with 5/e SAS adapter and PV TL2000 connected to server with one cable. Do I HAVE TO terminate the second SAS interface on the library. Just to clarify. If "yes", can I useiSAS-88LB Loopback Adapter for Mini-SAS 26-ckt SFF-8088 in this case, coz no any terminator was handled with the library from vendor.
What is the exact error on the device when you look at the properties? It should have an error code. Doing a Google on that can yield some ideas.
Also; backup applications use their own drivers. If Windows has a driver installed for the device it could cause the Windows native backup service/application to get a lock on the drive/changer and prevent the backup application from using it.
Did you try disabling the device in device manager and then see if Arcserve can then use the device?
I resolved the problem by re-installing drivers for Tape Drive. Now Windows can see it normaly as the ARCserve.
But find out a new one... In specification list (for BrightStore ARCserve) listed that PV TL2000 should have 74H8 FW version. I have newer 8371. I tried to downgrade FW, but recieved an error: "Invalid FW type". Is it possible to downgrade FW?
Dev Mgr
6 Operator
•
9308 Posts
•
3 Points
369
0
Posted October 28th, 2008 11:00