
UNSOLVED
PowerVault MD3260 Questions
Hello
I am currently looking at replacing my Dell MD3000 DAS, I have approached a few vendors and Dell has put forward a MD3260 DAS system along with a server. The setup has 2x 2GB controllers with 136TB of NL-SAS disks. Currently my MD3000 is totally overloaded and slows to almost a complete stop at times. We have about 70TB stored on there and our users are often uploading and downloading 1-2TB a week to this system.
- If I have 2 x 2 port SAS cards in my server (I will get 2 servers if budget allows) can I connect all 4 to the storage array and then create 4 LUNs so each one uses 1 separate 6Gbs connection (giving me a total of 24Gbs on just 1 server)?
- Will the 4GB controller give a big boost in performance?
- Has anyone used the SSD Cache?
- Has anyone got any experience and opinions on using this system?
Thanks
Responses (1)
Solutions (0)

DELL-Kenny K
1 Rookie
•
685 Posts
301
1
Posted December 19th, 2013 11:00
If you go to page 8 of the deployment guide below it shows the way to config the array with 2 servers and dual controllers and other options as well. Take a look as I am sure it will answer your questions.
ftp.dell.com/.../powervault-md3260_Deployment%20Guide_en-us.pdf
This is a great system and when it is properly configured you will have a high performing storage system. Please let me know if you have any other questions or concerns.