MD3800i - Cannot Use All 12 Disks In MD1200 Expansion Shelf For Disk Pool
I recently added an MD1200 expansion shelf to our MD3800i SAN (enclosure 1). The MD1200 has 12 8TB near line SAS disks and I would like to configure the entire shelf as a single disk pool.
the problem .... despite creating the pool manually, no matter what I do, it will not allow me to use disk 11 (the 12th disk). It stays unassigned. The disk shows optimal and in no way does it appear defective.
I have another MD3800i, with 12 8TB disks in enclosure 0 and it is able to use all 12 disks.
Is it possible the problem is related to the fact that enclosure 0 on the MD3800i with the problem is configured as a disk Group, not a pool and that the disk group has a hot spare configured? Does it show how think it needs to reserve the disk in enclosure 1 for hot spare coverage for the disk group? it does not show as being used fro hot spare ,,, but ,,,,
What is the current version of firmware that you are running on your MD3800i? Can I get you to gather a support bundle from your MD3800i so that we can review it to see why it is not adding the 12th disk into the disk pool? I will send you an email to your email address that is in your profile that you can reply back with the support bundle.
Please let us know if you have any other questions.
This issue is resolved. It turns out that the brand new MD1200 expansion shelf shipped with (11) 8TB drives and ... (1) 6TB drive (disk 11).
Had a new 8TB drive shipped and replaced it this morning ... all is right again.
I have to own this one, as I should not have ASSUMED that all eight disks were as expected; I should have paid closer attention to the details when looking at the drive's status.
DELL-Sam L
Community Manager
•
8148 Posts
•
34709 Points
853
0
Posted June 28th, 2017 09:00
Hello manofbronze,
What is the current version of firmware that you are running on your MD3800i? Can I get you to gather a support bundle from your MD3800i so that we can review it to see why it is not adding the 12th disk into the disk pool? I will send you an email to your email address that is in your profile that you can reply back with the support bundle.
Please let us know if you have any other questions.