Would you do me a favor and clarify the specific devices you are working with?
I ask as you are comparing a kb about an ME5 (rbod) issue with the HBA, to an HBA manual page that is talking about ME484 jbods and MD24 jbods. For your actual use case you're asking about a "powervault" with no specific model. Knowing what device is being used, and what you are trying to do would help us know which documentation applies best.
Let me know.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
0
0
Posted December 17th, 2024 20:46
Since its has an ME5 on the other end, I would suggest you use one of the bottom 4 from this diagram for the host side HBA cabling.
0 and 2 like the far left is good, 1 and 3 is good, any of those 4 bottom combinations.
Either of the top 2 cablings like (0 and 1) or (2 and 3) will cause some intermittent degraded connections.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!