i'm having touble with my PV 120T when backing up data exceeding capacity of one tape.
configuration:
NT4 Server SP5, CA ARCServe6.61 Build 849 (german).
the tape unit consistenly fails when it needs to autoload. The actual error in the ARCServe Log is:
014657 TAPE E6096 Media Error [ABSL:3030 CMD:Ah]
014657 TAPE ***TapeAlert*** The following information is for Device:emotion-14::
014657 TAPE W6906 The operation has stopped because an error has occurred while
reading or writing data which the drive cannot correct.
014657 TAPE E6915 The tape is from a faulty batch or the tape drive is faulty:
1. Use a good tape to test the drive.
2. If the problem persists, call the tape drive supplier helpline.
014657 694 E3714 Unable to write to media. (MEDIA=12/31/00 2:21 PM, EC=UNRECOVERABLE DATA ERROR)
btw is there a possibility to simulate an media-cahnge (e.g. a full first tape) so i can check if the autoloader works without having to wait 2,5 h until the the first tape is full?
Im using Win2K server sp3 Arcserve2000 with Dell PV 120T and im having the same errors... I have searched the web (and CA) for months but havent found anything regarding this issue. For me the error appears on an unregular basis. I run 6 of my 7 tapes in daily set and use the 7th tape (which i change manually) for weekly and monthly sets. The error appears randomly on the daily tapes... One week everything runs ok and another I get the error on one random tape. I have removed the tapes that have had errors and replaced them whit new ones but it doesnt help....
I have exactly teh same problem. sometimes it does backup sometimes it does not.I doubt that it is from teh Tapes since It happens on a new tape too. I took the tape drive for a air pressure cleaning. They cleaned and checked it and told me that the Head is not damaged.
My only guess is that it is a software problem. I run WinNT problem. Does anybody know that what the actual problem could be?
Not that this will ease your mind at all really - BUT I have the same issue running Win2k Server SP4 with an internal LTO drive (HP Ultarium) and we have the same issues. Sometimes it works great and then for a couple weeks (like now) it produces all sorts of errors..... See below:
I have done some research regarding to the ArcServ 6.61 backup software. There is very little in the Internet but there are still some things. This program is a Computer Associates soft. CA has stopped supporting it since there are newer and I guess better versions. I have installed the latest SP to improve its works but it did not help. As a software related issue I suggest that either you need to reinstall it or upgrade or use a different/newer software.
Fortunatly it is not a tape drive or atape problem. My tape drive worked fine while using another soft.
Now I am using a PV110T SDLT drive with Veritas BE 9.0
It was working fine for some times after the installation however at some point it was rendomly canceling the scheduled jobs. It was running fine a manually set jobs. This was exactly teh same problem that I was having before ( in my logs above). So what I did was to run a scheduled job manually and after taht it's now 4th day that the scheduled jobs are running all right.
My guess is that there was some glitch in teh schedule set up which got cleaned up after I run it manually.
This might help people who have exactly the same problem.
:smileyvery-happy:Well perhaps the BEST advice is to buck up and go with a different backup software.... Like NT Backup. :robottongue: It may not be the best - but I think it is more reliable than Arc Serve!!! : )
Blackside
10 Posts
723
0
Posted December 4th, 2002 08:00
Hi,
Im using Win2K server sp3 Arcserve2000 with Dell PV 120T and im having the same errors... I have searched the web (and CA) for months but havent found anything regarding this issue. For me the error appears on an unregular basis. I run 6 of my 7 tapes in daily set and use the 7th tape (which i change manually) for weekly and monthly sets. The error appears randomly on the daily tapes... One week everything runs ok and another I get the error on one random tape. I have removed the tapes that have had errors and replaced them whit new ones but it doesnt help....
Im stumped!