UNSOLVED

DerrickManigo

updated

3 months ago

0

5010

February 19th, 2004 03:00

PE newbie question

I have a PE 4200 single 233,

Days of reading different post on clean installs of win2k server, I keep seeing the "array cannot be over 12gb"

The server only has 3, 4.3gb scsi drives. I created the 4 boot disk and they run fine, no errors or hanging. Once it asks for the win2k cd, once inserted, it does not read the cd or I should say recognize it as a bottable cd.When the "array" is spoken of, is this refering to the cd or the hd's itself?

  • vpresley83

    2 Intern

    •

    307 Posts

    156

    0

    Posted February 27th, 2004 21:00

    Hi

      Array as in  Hard Drive raid array.  Assuming you have one.  You may need to check your array settings.  Press what ever keys indicated during the boot sequence to get to your array settings.  Go from there.  Do you have all the documentation for the HD array setup ?  Do you get a DOS prompt after you finish with the floppys ?  If so, path over to it and run setup.

                                                       Vince