2465

updated

2 years ago

2

2465

1 Rookie

•

5 Posts

•

2 Points

0

726

January 8th, 2025 15:49

PERC S150 Raid-1 Confusion

Hello, I am having an issue with our primary server's RAID configuration. This is a Windows 2022 Server that I setup a few years back, and I thought I set it up as a RAID-1 mirror with 2 physical hard drives. I had not checked the RAID logs in the last 2 years due to some health issues; but I am currently viewing the logs now and am confused at what I'm seeing. Forgive my ignorance, I have little familiarity with RAID setups.

PHYSICAL DISKS STATUS:

As you can see, the second physical disk is showing as READY; does this mean i possibly never assigned the second physical disk as part of the RAID setup? I have never swapped a physical drive on this server so I am confused by what I am looking at.

VIRTUAL DISKS STATUS

I am a bit confused why there are two virtual disks showing.

VIRTUAL DISK 1 STATUS

VIRTUAL DISK 2 STATUS

On the surface it appears to me that I never assigned the second physical drive as part of the RAID-1 mirror setup (but that still leaves confusion regarding the second virtual disk). I just want to be sure of what I'm looking at before I proceed. Any thoughts are appreciated.

Thanks!

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    0

    0

    Posted January 13th, 2025 07:44

    Hello, I think if you power down at around 80%, it will go back to square one. The rebuilding will start from zero once again.

    Respectfully,

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    0

    0

    Posted January 8th, 2025 20:31

    Hello,

     

    First I would recommend to confirm you have good backup when dealing with hard drive issues.

     

    PD 0:1 shows Ready on one screen shot and on another it shows Failed Non-RAID. It should be RAID Capable.

     

    You may need to replace the drive but lets try to get it to RAID capable and start rebuilding into the RAID-1

     

    Look here for converting RAID

    Converting to RAID disks page 24

    S150 User Guide

    http://dell.to/4fNipdf

     

    Check if it starts rebuilding automatically.

     

    If it doesn’t then try setting it as a Global Hot Spare

     

    Assigning the global hot spare disks Page 26

    http://dell.to/4fNipdf

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!

  • 2465

    1 Rookie

    •

    5 Posts

    •

    2 Points

    0

    0

    Posted January 8th, 2025 21:56

    @DELL-Charles R​ Thank you for the response. I have remote access to the server but I won't be on-site until the weekend. I can assign the hot spare through the OMSA interface; should I attempt that at this point, or wait until I am able to try your first suggestion?

    Thank you.

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    0

    0

    Posted January 9th, 2025 02:55

    Hello, backup should be the #1 priority.

     

    Respectfully,

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • 2465

    1 Rookie

    •

    5 Posts

    •

    2 Points

    0

    0

    Posted January 9th, 2025 02:58

    @DELL-Young E​ Thank you. I have multiple backups in place currently, as well as  a fresh one from last night.

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    0

    0

    Posted January 9th, 2025 08:51

    Hi,

     

    As the title states, it is confusing. You only have 2 drives in the server right? There should be only 1 RAID1 VD, but in the screenshot it is showing 2 VDs. You're saying you have a hotspare? But it is not showing up in physical disk view. I'd wonder if the hot spare is the one showing failed as Non-RAID. What are the available option listed on Physical Disk 0:1? You might want to check on the logs, for some clues on which drive has failed, so you do not use it as the rebuild disk. 

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • 2465

    1 Rookie

    •

    5 Posts

    •

    2 Points

    0

    0

    Posted January 9th, 2025 13:34

    @DELL-Joey C​ Yes there are only two physical drives in the server. No hotspare just the two drives mirroring eachother (assuming I set it up correctly in the first place). The available options for Physical Disk 0:1 are "Assign Global Hot Spare" and "Set Disk Cache Policy". I am considering trying the "Assign Global Hot Spare" function as Dell-Charles R recommended, I just want to confirm that is safe to do at this point. Let me know your thoughts.

    Thank you for your reply.

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    0

    0

    Posted January 9th, 2025 13:39

    Hello,

     

    Yes the next step would be to set as Global Hot Spare.

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!

  • 2465

    1 Rookie

    •

    5 Posts

    •

    2 Points

    0

    0

    Posted January 10th, 2025 22:01

    @DELL-Charles R I was able to assign Drive 0:1 as a hot spare and it is currently rebuilding (at 75%). Is it safe to power-down during the rebuild? I am asking as I have a separate issue that I need to reboot for.

    Thank you.