UNSOLVED

1Advancing

updated

10 years ago

0

2503

February 21st, 2017 22:00

Hard drives failing... bad sectors reported in RAID member virtual drive... Trouble rebuilding.

Hello, 

Looking for some advice on a problem with a server. It is a Dell T620 with PERC H710 and SAS drives in RAID 5. 

2 drives show Failure Predicted status, but I suspect one of them is failing more then the other. RAID is in degraded status. 

For some reason in RAID control panel the 2 drives show "missing", I try to re-seat and restart, it shows one drive as "foreign", if I press F to import it does go in Windows. After that it works for roughly an hour or two then crashes and restarts.

Also OpenManage and Windows reports bad sectors. The size is very small but does exist.

I ordered 2 drives and installed 1 and rebuild process started, but then the server crashed again. I started rebuild process manually again on the new drive but server crashed at about 60% rebuild. 

I am not sure if the other drive is causing the reboot, but I cannot replace it until the first rebuilds as I have 4 drives in RAID and need at least 3 to keep it functional.

I need to find some way to rebuild the RAID. I don't know if the other drive is causing this, or the bad sectors on the virtual disc. Other less likely guess is RAID could be failing, but again probably not.

  • ale123

    1 Rookie

    •

    93 Posts

    1916

    0

    Posted February 22nd, 2017 02:00

    If you have 2 failed drives in a RAID-5, you are out of luck, replace failed disk and restore from backups.

  • theflash1932

    11 Legend

    •

    16255 Posts

    1916

    0

    Posted February 22nd, 2017 05:00

    True, if two drives fail in a RAID 5, the array is offline, but there are ways to return it to an operational state. In your case, however, the OS appears to have been damaged (possibly the underlying virtual disk too), so I'd recommend wiping out the array and reconfiguring, then restoring the OS from backup.

  • 1916

    0

    Posted February 22nd, 2017 11:00

    One of the drives is showing "predicted failure" and to my understanding is not fully failed. I can still boot to OS if I press F. You still think it is not recoverable?

    The only problem is that due to corruption and bad sectors the full backup would fail, but I think I have an older one, and I was copying company data manually so have recent files, just would need to extract recent emails somehow as those were not backed up for few days.

    So you think there is no way to fix this? When I did checkdisk command it found very very little bad sectors, I think like 24kb if I remember correctly.

  • 1916

    0

    Posted February 22nd, 2017 11:00

    One of the drives is showing "predicted failure" and to my understanding is not fully failed. I can still boot to OS if I press F. You still think it is not recoverable?