UNSOLVED

NAS3R

updated

19 years ago

N

NAS3R

15 Posts

0

4305

May 25th, 2007 19:00

2850 not booting after i tried to switch the boot drive to another disk

I have a dell 2850 with a perc 4e/di controller. I had 3 146gb drives in a raid 5 setup with 2 partitions, one for the os and the other for storage. I ghosted the os parition to another scsi(non raid drive). I then physically removed the 3 drives in raid 5 and tried to boot from the new drive i had ghosted the image too. This did not work. The drive was seen as being online and i selected it as the boot device but it would never boot. It was  getting late so i decided i would try again after the weekend. I reinstalled the 3 drives that were in raid 5 setup and they are not booting either. I'm not familiar with these controllers so i need baby steps to get this server back up and running. As of now there are only 3 drives in stalled (the original ones that were in raid 5). Its setup as logical drive 0 and its set to boot up logical drive 0 but it doesn't find anything to boot and then gives me the option to enter the perc management utility. Thats where i'm at right now.
 
Any help would be great
 
 
No Responses