UNSOLVED

dmichel

updated

11 years ago

D

dmichel

6 Posts

0

73425

July 22nd, 2015 14:00

R620/R630 PCIe Slot Power Limit

Hi,

I'm trying to find out if any of the slots available on the R620 (12G) and R630 (13G) are capable of suppling a FusionIO card with 75W of power. Currently the cards are in slots that are only supplying the device with 25W.

Thanks,

Drew

  • Daniel My

    12 Elder

    •

    6204 Posts

    2990

    0

    Posted July 22nd, 2015 16:00

    Hello Drew

    I'm fairly certain that the PCIe slots are capable of supplying the 75w of power to the card. By default the fusion IO will only draw 25w from the PCIe slot. You need to go into the fusion IO management interface and enable the option to draw all power from the PCIe slot.

    Thanks

  • dmichel

    6 Posts

    2990

    0

    Posted July 22nd, 2015 18:00

    I'm reluctant to override the settings for the device without knowing power capabilities of each slot, as well as the entire system. Also why is the BIOS not reporting the correct information/how can I inspect what these values should be? I can't find any reference to the power limits in the technical specs or the BIOS.

    Here's the output of fio-status/fio-pci-check from an R630, showing that the slot is only able to provide 25W. 

    fio-status -a
    ...
    PCI:03:00.0, Slot Number:3
    PCIe slot available power: 25.00W
    PCIe negotiated link: 8 lanes at 5.0 Gt/sec each, 4000.00 MBytes/sec total

    fio-pci-check

    Root Bridge PCIe 6250 MB/sec needed max

    Bridge 0000:00:02.00 (03-03) (8086:2f04)
    Needed 4000 MB/sec Avail 4000 MB/sec

    ioDrive3 0000:03:00.0 (3002) Firmware 118126
    Slot Power limit: 25.0W (25000mw)

    Thanks

  • Daniel My

    12 Elder

    •

    6204 Posts

    2990

    0

    Posted July 23rd, 2015 10:00

    The manual states that the limit is 25w for both the R620 and R630

    http://www.dell.com/support/home/us/en/04/product-support/product/poweredge-r620/manuals

    http://www.dell.com/support/home/us/en/04/product-support/product/poweredge-r630/manuals

    Non Dell qualified peripheral cards and/or peripheral cards greater than 25 W are not supported.

  • sradman

    7 Posts

    2990

    0

    Posted November 20th, 2015 01:00

     

    Non Dell qualified peripheral cards and/or peripheral cards greater than 25 W are not supported.

     

    That statement is only valid for operation outside the standard temperature range (Expanded Operating Temperature).

    NOTE: Outside the standard operating temperature (10 °C to 35 °C), the system can operate down to 5 °C or up to 40 °C for a maximum of 10% of its annual operating hours.