UNSOLVED

hosseinfani

updated

6 years ago

H

hosseinfani

1 Rookie

•

9 Posts

0

1778

March 4th, 2021 19:00

PowerEdge T140 Hibernate or Standby NOT Available

I have windows server 2019 installed on PowerEdge T140. I want to enable hibernate or standby options. However, when I check their availabilities, I receive the following report:

C:\Users\Administrator>powercfg.exe /a
The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.

Standby (S2)
The system firmware does not support this standby state.

Standby (S3)
The system firmware does not support this standby state.

Hibernate
The system firmware does not support hibernation.

Standby (S0 Low Power Idle)
The system firmware does not support this standby state.

Hybrid Sleep
Standby (S3) is not available.
Hibernation is not available.

Fast Startup
Hibernation is not available.

 

I have checked the Microsoft help pages and when I want to enable e.g., hibernate, I receive the error:

 

C:\Users\Administrator>powercfg.exe /hibernate on
Hibernation failed with the following error: The request is not supported.

The following items are preventing hibernation on this system.
The system firmware does not support hibernation.

 

Any help is highly appreciated!

  • DELL-Erman O

    Moderator

    •

    2984 Posts

    •

    14874 Points

    1392

    0

    Posted March 5th, 2021 00:00

    Hello,

     

    Products such as servers that belong to the Enterprise product range are configured to provide best performance for the longest time. Due to such details, they are prepared with an architectural structure different from Consumer products. Generations before 14G do not support hibernation and I don't think it changes in 14G generation. You can still enable the C-States sectşon in the BIOS and try again, but I don't think it will work. If there are users who can overcome this situation and activate hibernate in some way, it may be useful to share their experiences. However, even if you find out a method and can use hibernate indirectly on a server, I would not recommend it to be applied against the risk of data corruption.

     

    Hope this will helps!

    DELL-Erman O

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • Steve.Robocop.Barry

    1 Rookie

    •

    20 Posts

    •

    16 Points

    1190

    0

    Posted September 12th, 2021 02:00

    I have a DELL EMC Poweredge T140 with Windows Server 2016 Essentials connected to an APC Back-Up Pro 550 UPS. The UPS provides Hibernate instruction via the USB to the server on power loss ( a problem we have here; today a lightning strike tripped the power breakers again)

    How can I enable the server to respond to the Hibernate instruction and shut itself down before the battery runs out?

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    1172

    0

    Posted September 12th, 2021 18:00

    Hi, thanks for choosing Dell.

     

    C1E

    Enables or disables the processor to switch to a minimum performance state when it is idle. This option is set to Enabled by default.

    C States

    Enables or disables the processor to operate in all available power states. This option is set to Enabled by default.

     

    Taken from  https://dell.to/3EbvETn

     

    I believe you need to "disable" these to get to Hibernate. Hope this helps.

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!