UNSOLVED

wabit

updated

15 years ago

W

wabit

1 Message

0

16588

October 19th, 2005 16:00

poweredge 800 cant boot from cd-rom

heres the problem trying to install windows xp on the system but i dont get a choice of being able to select the cd drive as a bootable device, ive tryed quite a few drives and still no luck

Message Edited by wabit on 10-19-2005 12:55 PM

  • d3vlabs

    1 Rookie

    •

    16 Posts

    289

    0

    Posted September 30th, 2011 17:00

    bump. yes i have the same issue

  • theflash1932

    11 Legend

    •

    16255 Posts

    289

    0

    Posted October 1st, 2011 20:00

    What have you tried?

  • d3vlabs

    1 Rookie

    •

    16 Posts

    289

    0

    Posted November 17th, 2011 18:00

    i havent tired much. the cd-rom drive will show in windows OS (my computer), i can see the drive just fine and its working operating.  bios does not have the cd-rom listed as one of the available boot devices (boot priority list) .usb emulation enabled, i can boot from usb, but not from cd-rom. it might have something to do having 4 sata ports on board and 2 on add-on card. the cd-rom is connected to the pci card add-on (2 sata ports) not the primary/native 4 ports on the motherboard. im not sure why its set up that way. when i try connecting the cd-rom to the existing  native 4 ports (2 open), the cd-rom doesnt show up at all. maybe theres a switch in bios to enable/disable the other 2 sata ports that needs to be switched? ive actually had a IDE cd-rom drive in there before and i think it was booting fine, once i switched to SATA, no boot.