True Mobile 2300 and wireless dial up connection possible?
With a Dell inspiron 8600 laptop can I use the True Mobile 2300 for wireless connection to the internet with a dial up connection or do I have to have broadband or DSL for this to work? If it is possible how do I connect the router, cable won't fit into phone jack, do I need a special cable to do this? I am using Windows XP, thanks.
You'll need a cable or DSL connection to use the 2300 to connect to the internet. From there, you can use the 8600 to connect wireless to the 2300 and then on through to the internet.
If you want a wireless router that supports an external hardware modem (not a winmodem), look at the
D-Link DI-713p or the
SMC SMC7004AWBR routers (also the SMC7008AWBR). They will dial an external hardware modem when you want to access the internet. They also have a built-in print server to hook your printer to. The SMC7004(or 8) BR is an identical wired version (no wireless) that would also work and you'd use the 2300 in its access point mode to gain wireless. You can find the SMC7004BR (SMC7008BR) on eBay.
I am planning to do the same thing except will be using (yet to arrive) Inspiron 5100. The Dell salesperson told my the 2300 could be used with dial-up but now am getting conflicting reports and wondering if I should cancel the order (for the router not the notebook). A few questions I have:
Do I have to use an external (non winmodem) model? If it makes a difference, I keep my desktop (Dimension 8250) continuously connected to a seperate phone line.
To use a router, do I need to install an ethernet card into the desktop?
The 2300 will not support a dial-up modem. Only the routers I gave you do I know for sure will dial an external modem connected to them. Yes you have to use an external hardware modem (not a Winmodem modem!!). The Dimension could have its ethernet port (if one is not there, you'd need to get one - $5 for one at Best Buy - Realtek chipset based ones are cheap and reliable) connected to the router you choose and the phoneline connected to the Dimension could be the one to the new external modem. The SMC7004VWBR is a completely different animal with no modem support - again it is only the models I gave earlier. There may be other models from different manufacturers, but I am not aware of them.
I decided to just go ad-hoc. I've got the True Mobile 1300 card in the inspiron and purchased a wireless netgear PCI card in my Dimension. Signal strength has been excellent and surfing hasn't been bad (for dial-up).
However, something happened during set-up that I haven't had the time to sit down and think about. My printer is no longer available on the desktop (or off the network) and it won't let me add a printer. Gives me an error message (something very simple - can't remember exacty. ? can't complete that task or something along those lines).
inspiron1100
22 Posts
199
0
Posted January 29th, 2004 00:00