Not connecting to Buffalo WHR G-125 with Latitude E5420/Intel Centrino Advanced
N 6205
Hello All
I just purchased a used Latitude E5420. It looked like the seller did a fresh reinstall of Windows just before selling it to me. The non-internet applications are working fine, but it's not connecting to my home wireless router. I have a Buffalo WHR G-125. I tried pretty much every type of security type, but nothing worked, so I eventually disabled security and set up MAC filtering, after which I put in the MAC address for the laptop. That still didn't solve the problem.
It does connect to my neighbor's unsecured linksys network. Both the neighbor's network and mine are 802.11g
I went to Intel's website and installed the latest drivers for the network card, but that didn't help. I'm using the latest firmware on the router already.
Regarding 'restoring my computer's software" I'd rather not to do that, because it would erase Microsoft Office from the computer. Here is my system information:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Dell>systeminfo
Host Name: DELL-PC
OS Name: Microsoft Windows 7 Professional
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Organization:
Original Install Date: 11/27/2012, 2:31:07 AM
System Boot Time: 4/1/2013, 10:29:36 AM
System Manufacturer: Dell Inc.
System Model: Latitude E6420
System Type: x64-based PC
Processor(s): 1 Processor(s) Installed.
[01]: Intel64 Family 6 Model 42 Stepping 7 GenuineInt
Thanks. I just realized that I'm using a router that I purchased in 2007. I didn't realize it was that long ago that I had purchased it, and I suppose I may just need a new router. I appreciate the link to the Dell Ownership Transfer. I'll do that immediately and then install the items above in the order you cited.
because WIndows said I had a newer version already installed. I still can't connect to my wireless network. I can see it listed as an available network with a strong signal, but when I try to connect, it runs for a while and then I get a message about Windows being unable to connect. I'm using my neighbor's wi-fi for now.
Also, this afternoon I was in an area with a strong free wi-fi signal but my laptop didn't even "see" that signal. It did pick up about 30 other wi-fi networks in that area, so I couldn't understand why it was doing this.
PudgyOne
11 Legend
•
30315 Posts
•
106638 Points
892
0
Posted April 1st, 2013 00:00
Chris,
You can try, Restoring Your Computer´s Software to the Factory Settings If that doesn't work,
Can you run Finding System Information REMOVE YOUR PRODUCT ID and REGISTERED OWNER and post the information back here.
Rick