I just unpacked my new Inspiron 9100 with built in wireless last night and was unsuccessful in getting online :( I have a linksys router which worked fine with my old 8000. The 9100 card sees the signal and reports an "excellent" or "very good" strength, but will not connect to the internet at all. I know the router is working, since I can connect with my Axim and zoom right along to websites. It shows some packets being sent, but very very few recieved. Any ideas? I want to play with my new toy! LOL
What Linksys router do you have??...What wireless adapter??
Do you have a firewall, if so, disable it. Also disable encryption and see if you can connect (remember passphrase only works with linksys cards, you have to manually enter encryption key for the Dell Products).
If your firewall and encryption is disabled, change the router channel (1, 6 and 11 are the nonoverlapping channels).
If the above doesn't work, let us know your router model, wireless adapter, OS and IP address received by the system.
We figured out the problem. The built in card for the 9100 is a "g" while my linksys router is "b". I put the older wireless card in the new laptop last night and was able to connect fine. All I need to do is get a newer model router and I should be able to use the built in card with no problems! Guess I'll just have to get that new router I have been eying a little bit sooner than planned! LOL
justmeagain
55 Posts
246
0
Posted September 16th, 2004 18:00
What Linksys router do you have??...What wireless adapter??
Do you have a firewall, if so, disable it. Also disable encryption and see if you can connect (remember passphrase only works with linksys cards, you have to manually enter encryption key for the Dell Products).
If your firewall and encryption is disabled, change the router channel (1, 6 and 11 are the nonoverlapping channels).
If the above doesn't work, let us know your router model, wireless adapter, OS and IP address received by the system.