I've got 2 servers and a gateway all on the same subnet connected to the same 2748. Is it possible to separate the two servers on different VLANS, so they can't contact each other, but both servers can contact the gateway?
You should look into using Private vlans . Dell has a good white paper on this which would explain it all to you. Although i am pretty sure the 27XX series switches dont support this. Your other option is to introduce a router or routing switch into the mix with multiple vlans.
I hope this helps!
And you mentioned they were all in the same subnet, i think you forgot to put a 1 in front of the 6 for the gateway ip address
Although this is not possible with the 27xx switches as mentioned. A way to do it with the switch you have is if the gateway supports VLAN tagging. Then you set the port that connects to the gateway to transmit tagged packets, and hopefully your gateway can be configured to pass the same tags back to the switch. That way both servers can stay on different VLANs and the gateway will be able to speak to both of them.
DRNO10
184 Posts
269
0
Posted August 27th, 2008 13:00
You should look into using Private vlans . Dell has a good white paper on this which would explain it all to you. Although i am pretty sure the 27XX series switches dont support this. Your other option is to introduce a router or routing switch into the mix with multiple vlans.
I hope this helps!
And you mentioned they were all in the same subnet, i think you forgot to put a 1 in front of the 6 for the gateway ip address