mnantel

updated

10 months ago

M

mnantel

1 Rookie

•

1 Message

1

1252

March 20th, 2024 12:50

Is Highly Active Topic

U4025QW, USB hub issues

U4025QW in USB KVM mode. TB4 connected to MacBook M1 Pro. DP + USB-C connected to PC. USB hub connected to daisy chain USB-C / TB4 port. Also tried USB hub connected to regular USB-A port. 

If connected to the daisy chain port: USB hub devices only work on Mac (TB4).

If connected to a USB-A port: USB hub devices only work on PC (USB-C).

Some users are likely to want to use a USB hub device, as wiring can result in high clutter. Port count can be insufficient in some cases, such as in mine. I had no issues with U4021QW with this configuration.

(edited)

  • IPvSean

    1 Rookie

    •

    3 Posts

    •

    2 Points

    0

    0

    Posted November 3rd, 2025 16:02

    I finally got this working, almost a year later!  I had to hook up the Dell monitor to a windows computer to update to the newest driver.  It was impossible to update on my Mac, even after going through support....

    My Dell monitor model is U4025QW, and my firmware is now M3T105.  I am using an Anker USB hub and it works fine, I have a Stream Deck and a Yeti Microphone working great. My mac laptop is a 16-inch, 2023, Apple M2 Pro.  The USB hub is old, a USB 3.0 SuperSpeed 10-Port Hub from 2022 (or earlier?).  The UPC is 848061098983, GTIN: 00848061098983 and ASIN: B005NGQWL2.  I don't think there is anything special about the USB hub, but putting all the info here to help save someone else a headache.

  • Marcos Alcantara

    1 Rookie

    •

    2 Posts

    •

    2 Points

    0

    0

    Posted November 3rd, 2025 16:26

    Thanks Sean. After a lot of fiddling I’ve singled out to the Orico 10port USB 3.0 Hub. I’ve been able to make it work flawlessly now with a Tekera hub and it works fine. Perhaps something in the orico hub’s firmware was not compatible, but I’m happy with the results now. Appreciate the comment.

    Thanks,

  • CPA83

    1 Rookie

    •

    1 Message

    •

    2 Points

    0

    0

    Posted February 6th, 2026 14:31

    I had this issue as well.  I used the mac firmware updater to update to the latest firmware and all is well now.

  • fschade

    1 Rookie

    •

    1 Message

    •

    2 Points

    0

    0

    Posted January 20th, 2025 21:38

    Interesting, I have exactly the same problem regarding the hub, or let’s say pretty close to yours.


    i’m able to connect an external hub to one of the usb a ports, but then the host machine (tb) only sees two more ports. All other devises that are connected to the hub are ignored. I use an active hub, so it couldn’t be a power issue.

    This only applies to the machine that is connected via the TB port (Mac m4). The other Mac (studio m1) which is connected via DP + usb sees all connected devices. 

    I wonder if that’s a software problem (fixable via an update) or if it’s an hardware limitation or even worse a defective unit.

    I would love to hear some feedback from the support team, my monitor is only 4 weeks old at the time of writing.


    My connections are:


    "margin: 0;">

    mac m1: displayport + usb-c (sees all devices connected to the hub)

    mbp m4: thunderbolt only (sees only 2 devices connected to the hub)

    things I tried:

    - connect the hub to each machine directly to confirm it works, worked

    - tried several cable combinations to confirm there is no defective cable

    - I tried 3 different usb hub models to confirm it’s not a broken single unit

    (edited)

  • IPvSean

    1 Rookie

    •

    3 Posts

    •

    2 Points

    0

    0

    Posted January 28th, 2025 14:29

    same problem here, USB Anker 3.0 hub doesn't work off the Dell monitor... very strange

  • Speedy2004

    1 Rookie

    •

    1 Message

    •

    2 Points

    0

    1

    Posted February 13th, 2025 23:37

    I'm having a very similar issue here. The MacBook Pro (M2 Max) is connected via the provided Thunderbolt 4 cable. The monitor and ports all work as they should but when I connect a powered external USB Hub, nothing plugged into the hub reads/ mounts. 

    After checking for any loose connections, I tried a separate Thunderbolt 3 cable, and the hub, with all its peripheries, worked.

    I got onto the support team and they eventually sent me a replacement Thunderbolt 4 cable but that had the exact same issue as the original, ruling out a faulty cable being the issue.

    Support hasn't offered any resolution despite going back and forth since the 24th January so I'm not really sure what else to try as they're both supposedly active Thunderbolt cables.

  • IPvSean

    1 Rookie

    •

    3 Posts

    •

    2 Points

    0

    0

    Posted February 17th, 2025 15:11

    Has anyone tried using the monitor downstream from a hub that can do 5K output? This is super annoying... if I had one less USB device I would be fine....

  • exzone

    1 Rookie

    •

    1 Message

    •

    2 Points

    0

    0

    Posted July 18th, 2025 19:53

    I got my 4025 today and am seeing the same behavior on the latest firmware. Did someone figure out a solution for this?

  • ZonkZonk

    1 Rookie

    •

    1 Message

    •

    2 Points

    0

    0

    Posted August 9th, 2025 23:59

    I just got mine and having the same or similar issue I use a 10 port usb 3 hub and when I connect it to any of the  monitor’s USB A ports only 5 out of the 10 ports are active. Works fine if I connect it directly to PC. This is a Dell problem, after spending $2K for a monitor it is frustrating when one of the features you were looking forward to using is broken out of the box. Please find a way to fix this Dell. It is not a USB problem the usb spec allows for a lot of devices and hubs chained. 

  • Marcos Alcantara

    1 Rookie

    •

    2 Posts

    •

    2 Points

    0

    0

    Posted October 31st, 2025 12:31

    Same here, received the monitor yesterday and was incredibly hopeful this would work out of the box, but as always, compatibility frustrations.

    KVM switches mouse/keyboard USB-A to PC.

    With the 10 port USB 3.0 hub:

    -- On PC: KVM switches my  to PC just fine and devices work beautifully.

    -- On Mac: USB hub gets listed under system information / USB section but no device is mounted.

    I'm hoping this is only a software quirk. Otherwise, I'm considering returning the monitor.

    (edited)