
UNSOLVED
Closed
E
elvetemedve
1 Rookie
•
8 Posts
0
797
November 1st, 2023 12:12
U2723QE, display freezes randomly
I experience a problem with my new U2723QE monitor. There are two laptops attached to the monitor: Lenovo Thinkpad, Apple MacBook Pro. I set both laptops to sleep mode, the next day when I wake them up only the keyboard is active, but the screen is blank. When this happens pressing any of the menu button or power button on the monitor does not react. However power cycling the monitor (removing the power plug from the wall socket and putting it back) makes everything operating again.
The setup is the following. The Thinkpad is connected to the powered USB-C port, the MacBook is connected to the display port via a DP to USB-C cable and an USB-C to USC-C cable is used for signals. The Macbook is powered from it's own power adapter, while the Thinkpad is powered via the monitor.
Also KVM setup is completed via the built-in menu of the monitor.
The firmware version is M2T104
Does anyone else have this issue? What can I try to do to fix this issue?
(edited)
2 people also have this problem
Responses (3)
Solutions (0)
elvetemedve
1 Rookie
•
8 Posts
0
0
Posted November 3rd, 2023 14:52
@DELL-Chris M Thank you, that's useful to know.
So the issue is the U2723QE is not waking up versus freezing.
No, I don't think so, because in that case pressing the power button should wake it up I suppose, but nothing happens when I press it.
I will change the config you mentioned and see if it helps.
elvetemedve
1 Rookie
•
8 Posts
0
1
Posted November 20th, 2023 16:16
After a couple of weeks of testing, I can say the the configuration change did not help. Furthermore the freezing is not related to sleep mode as I saw the monitor not reacting neither to the menu button, nor the power button while the screen display was on. Again unplugging it from the wall socket resolved it.
I'm very sad that the quality insurance is so poor as otherwise this would be a great product.

DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
0
0
Posted November 1st, 2023 13:54
To receive assistance from Dell chat Technical support, they need to first verify the warranty status. Click the "Get Help Now" icon on the right to start a live chat session. Provide to them the private U2723QE Service Tag.
So the issue is the U2723QE is not waking up versus freezing.
* U2723QE Menu- Input Source
- Set Auto Select to On
- Set Auto Select for USB-C to Yes
* U2723QE Menu- Display- USB-C Prioritization
- Test both High Resolution and High Data Speed from the Laptops sleep, then wake up state
(edited)
DELL-Chris M (old account)
#IWork4Dell