I got an U2722DE as a replacement for a defective U2721DE. After a few hours of usage, the famous "no USB-C signal from your device" error appeared. I tried the known solutions:
1. disconnect everything, turn off, press power button for 8/10/30 seconds, reconnect
2. check and update firmware (it's at the most recent version M3T107)
3. contact support again which had me:
1. test with a different computer (issue appears on Mac, Win, Linux; two different laptops, all available USB-C ports)
2. test with a different cable (no impact)
3. test both laptops with different screens (Dell and non-Dell; both laptop work fine with other screens)
4. verify updated drivers and Dell Device Manager
5. after almost a month of tests, sent a new monitor (still a U2722DE)
4. monitor worked for a few hours, until the error appeared again; I tried the reset procedure but still no luck. In this case though I checked and the issue appeared as soon as I connected my hard drive to the USB ports of the monitor
5. disconnecting the hard drive does not solve the issue
6. connecting the hard drive directly to PCs causes no issue (therefore I think it's unlikely that the hard drive is at fault)
7. IMHO this is a firmware issue connected to the setting for priority between data and video signal on USB-C (I did not change the default, which seems to be to prioritize data)
8. technical support no longer answer me, claiming I'm at fault for connecting the drive
Update: after contact with Dell Support via chat I was offered a replacement device. I hope this one won't have the same issue again, but I will definitely not connect the hard drive to the screen. It's weird to me to have USB 3 ports and not being able to connect memory devices, but I'd rather have working USB-C video...
I often have the error "no USB-C signal from your device"
Once it appears, it never goes away (tried with multiple laptops, multiple cables, turn display on and off, factory reset etc) and USB-C video functionality is lost forever (data still works though)
Dell offered many replacement devices (sometimes U2721DE, sometimes U2722DE)
At some point it seemed to be related with connecting an external hard drive (despite the hub functionality of the monitor should support it)
I got one last (for now?) replacement and I _did not_ connect the hard drive
It worked for about a week and a half, and today the issue appeared again
While I understand Dell's frustration (this last one was the third replacement) I am also at a loss when it comes to identifying the root cause of the issue. I'm not doing anything unusual (I think):
I've got a few devices (mouse/keyboard/microphone) connected to a hub, the hub is connected to the monitor
The monitor is configured to get input from two sources (laptops through USB-C, desktop PC through DisplayPort)
Sometimes I use the USB ports dedicated to charging to charge some small devices (bluetooth headphones and such)
The monitor is plugged into a power outlet multiplier with a switch (which I turn off when the devices are not in use)
Any ideas? I'm weary of getting a replacement (either through the Dell support or by buying a different screen) until it's clear what is going on :(
I'm Husen, one of the Supervisors at Dell Social Media Support. I hope you’re doing well. I’m writing to confirm if the issue you had reached out to us for has been resolved to your satisfaction.
I've reviewed your journey with us, and I apologize for any inconvenience you've experienced with our product or services. If you have any feedback about your experience with our support, please let us know. It will help us to work and improve on those areas and provide our customers a better support experience. Please reach out to us anytime if you have any questions or concerns, and we’ll be happy to look into them and assist you.
@DELL-Cares Hi Husen, thank you very much for joining the posts together, that's nice of you and I hope more valuable to the wider community looking for support in past experiences.
I'm running some more tests, as I was requested to try a different Dell cable to make sure that that is not where the problem lies. It is not, and I'll follow up on the chat to see possible future solutions.
Overall it's really troubling that we cannot figure out what is causing the issue, and it would be nice to have data from the faulty devices that were returned (I sure hope there is a process in place to test and recondition them and that they're not automatically tuned into electrical waste). Having at least a hint of whether the problem is hardware (e.g. power surges somehow messing with the electronics) or firmware (e.g. disconnecting power while the firmware is switching out of displayport alt mode) would be extremely useful to further investigate and avoid the issue in the future.
At the moment I'm quite weary of even getting a replacement device, as I'm afraid the problem will appear again... It doesn't feel like we're moving towards an actual solution :( But please don't get me wrong, I totally understand that trying to debug such issues remotely is very hard and that a minimum of standard procedures must be followed :)
I was asked to test the laptop and screen combination with another Dell cable. Note that while the cable is the same between the third and fourth screens, it was replaced every time before (so the original, second and third screens all had different cables that came brand new with the boxes)
I do not have one (why would I?), but I thought there would be one in office, so I waited until today to do some tests
In office I tested the cable from home (and it works); I could not find a Dell cable but I could find another usb-c cable that does work with a Dell screen
I brought that one home, and still the issue with the error message appears
I contacted support in the chat and was told that this is not enough and that I must contact the sales team to purchase a Dell usb-c cable, which is not present in the store (unless you count the 25m version that costs more than the screen itself)
I cannot find a way to contact your sales team and I'm tired so I might try again tomorrow; still, if your screens are only supposed to work with original Dell cables I wonder if you should be allowed to sell them as USB-C at all
I contacted the sales team in my region and the confirmed that the only cables available for sale were the the 10m ones (which were still quite expensive), but that those were also produced by Logitech, so they would not fulfill the requirement of being an official Dell cable. The sales team suggested to further contact the tech support team.
The tech support team asked again which cables I was using and this time said that it should not matter if the cable is branded by Dell, as long as it's confirmed to work. Both the cables I tested are working on other screens, so I consider them confirmed to work.
The tech support said they would escalate the case to their senior team and would get back to me. I really hope we'll find a solution soon enough :)
Senior support asked to provide logs using a Dell utility (quite invasive from what I can tell), but fine I did that. Then I was asked again to provide the service tag multiple times and wait for senior support to check the logs.
After senior support checked the logs I was asked again to perform the usual steps (connect to a different plug, disconnect all cables, press the power button for 10 secs and so on) with no results. In the end, I was told I'd get another replacement. I am quite disappointed that we still don't have any idea what might be causing this and a bit afraid that the new device will have the same problem too.
@DELL-Cares is there any reason why there is no information/analysis on the returned devices? I'm sure it would have helped the senior support quite a lot with their investigations...
FNick
9 Posts
0
0
Posted October 2nd, 2023 16:44
Update: after contact with Dell Support via chat I was offered a replacement device. I hope this one won't have the same issue again, but I will definitely not connect the hard drive to the screen. It's weird to me to have USB 3 ports and not being able to connect memory devices, but I'd rather have working USB-C video...