My new 2408WFP doesn't work when connected through DVI. It works fine on VGA, but I'd prefer DVI. All I get on DVI is a black screen, after which my monitor goes to sleep.
Before the 2408WFP, I temporarily had a 2407WFP-HC hooked up through DVI and that worked perfectly fine. What could be the problem causing my 2408WFP not to work on exactly the same graphics card port? BTW, my graphics card is manufactured by Club 3D and based on a GeForce FX 5900 chipset.
Just to cover the basics, make sure you are setting the correct DVI input using the monitor's front control buttons, try a different cable, try the other input etc. And if possible try another computer!
It does sound like a monitor issue if another monitor worked over DVI. Did you install the drivers for it or are you just using the generic driver? I don't know if that makes a difference, but it may be worth checking. Also, any possible settings in the display properties or control panel that may affect it.
First time, I simply connected it to DVI and turned on the computer. Didn't work from the start, didn't show any start-up messages form my OS and the screen stayed black. Then it went to sleep mode, while the computer continued starting up.
Second time, I connected it to VGA and everything went fine. I reached Windows and there I installed the driver that came with the monitor. Then I shut down the computer, reconnected the monitor to DVI, same issue: an all black screen all from the start.
Manually switching by using the input select button as Chris suggests doesn't work either. At this moment I have both VGA and DVI connected, and when I switch to DVI the screen goes black again. It does recognise the cable though, since when I disconnect the DVI cable and then change input to DVI, the screen says "no cable connected" or something like that.
I know. You see, the problem is, I don't want to keep them both connected, I only want DVI connected. That should have nothing to do with clone mode, the monitor should already function on DVI before any Windows drivers are loaded. The 2407WFP-HC I had before, was connected only to DVI and it showed text and images as soon as I turned on the computer. The only reason for me to connect both DVI and VGA is to be able to make adjustments in VGA-mode and then try to see if they worked and if I can switch to DVI-mode.
SlipJigs
1 Rookie
•
85 Posts
557
0
Posted March 16th, 2008 13:00