UNSOLVED

dualMonitors

updated

20 years ago

0

13743

February 16th, 2007 21:00

3007 "HC" Version: do you need a TORX screw driver to assemble it out of the box?

In a review of the NEW 3007 "HC" version (not the first 3007 LCD model, but the one just introduced 2 weeks ago by Dell but announced several months ago that is the "HC" version, with 92% gamut versus the older 3007 non-HC version which has 72% gamut), they mentioned very specifically that you need to have TORX screw drivers or TORX wrenches in order to assemble it all together when you take it out of the box. Basically, no one has TORX wrenches at home!! Plus, they are hard to find! Worse yet, they don't tell you the size you need so you can "pre order" the right size TORX wrench online prior to the screen arriving! How odd of Dell?!? May I ask if owners of the HC version of the 3007 actually know if the current HC version ships with that special plate already mounted so you don't need a TORX wrench or screw driver to assemble it? What tools exactly should one have on hand when putting the 3007 HC together when you take it out of the box in order to have it fully functional? Typically, whenever an odd sized wrench is needed, say hex wrench, which costs all of $0.25, many manufacturers include it in the box. These TORX are even more rare and basically, no one is likely going to have these at home! I'm hoping to hear that Dell has either pre-assembled it or includes the proper tools. this is the review that specifically talks about the TORX situation (please scroll to the bottom of the linked page and it goes on on the following page as well): http://www.prad.de/en/monitore/review-dell-3007wfp-part3.html Looking forward to hearing from either a Dell moderator or a 3007 "HC" version owner! It would be inconclusive if an owner of the non-HC 3007 owner says one way or another, since we don't really know if they have made these changes in the "HC" version... ugh.
  • Frank-C-Belgium

    1 Rookie

    •

    25 Posts

    421

    0

    Posted February 19th, 2007 18:00

    Hi,
     
    My 3007 WFP-HC is due delivery on March 1st (next thursday).  I will inform you if TORX screw drivers are necessary.
     
     
  • 421

    0

    Posted February 19th, 2007 20:00

    Dear Mr. Tennisboy72: thank you for posting a reply to my thread asking about whether the 3007 HC version requires any special tools to put together - which the standard 3007 version apparently does, and strangely, no one seems to mention that fact except that german reviewer! may i ask what you think about all the various resolution issues that people are having? one thread talked about how even with a higher end video card, the resolution of the 3007 HC's resolution was wrong! One other thread talked about how the "...included cable is ONLY DVI single link, not the required DOUBLE LINK DVI! How totally strange for a high end monitor? There doesn't seem to be many answers to these various concerns/questions as the threads seem to "fizzle out" after a couple of questions and short answers but they don't seem to be really resolved! looking forwad to hearing from you and others. thx again.
  • Frank-C-Belgium

    1 Rookie

    •

    25 Posts

    421

    0

    Posted February 20th, 2007 05:00

    Hi dualMonitors,
     
    I've read that thread that they only ship a single link DVI cable and that's totaly wrong.  I mailed my dell sales and asked him that & he said they always ship a dual link DVI cable.
    And your concern about the resolution : you must acquire a graphics card that's been tested by Dell to get to the 2.560x1.600 px rez.  In the forum the Dell liaison person (Dell_ChrisM) has noted several times al the different graphics card (nvidia & ATI) that the've tested and work with the 30" monitor, so if you get one of those : it will work !!
  • 421

    0

    Posted February 20th, 2007 15:00

    Mr. Tennisboy: thx for your reply. i'm getting the 8800GTS 640MB version (made by EVGA, please see: http://www.newegg.com/Product/Product.asp?Item=N82E16814130071&name=Item-%23%3A-N82E16814130071) it's really about as high end as video cards come (except the 700+mb version of the same card, the 8800GTX). for a non gamer, with the intent of using this as a higher end home office purpose, with the 3007HC and the 2407 dell monitors connect to this card, using FULL AERO GLASS interface, the 8800GTS 640MB should MORE than be sufficient, despite the 4,000,000 pixel count of the 30" 3007HC monitor. as i'm not intending to game, the demands placed on this card is not that much, honestly. my concern, Mr. Tennisboy, et al., are all the postings regarding the inability to set the proper resolution! People have tried to ocnnect the 3007, with all sorts of difficulties, to use the 3007 at its native resolution - which is the only proper resolution - was borderline NOT possible! How can that be?? Anyone knows anything about 3007's various issues? The more serious issues i.e. resolution, among others? I'm quite concerned that buying this costly monitor, plus the expensive high end card 8800GTS, might not result in a working system!! btw, my os will be Vista Ultimate 32 bit. thx very much in advance.
  • Frank-C-Belgium

    1 Rookie

    •

    25 Posts

    421

    0

    Posted March 5th, 2007 18:00

    Hi,
     
    Last week i received my 3007 WFP-HC : NO special tools needed at all to put it together, in fact the you don't need anything, monitor is completely ready out of the box.
    Cable was a dual link DVI cable.  My graphics card is nVidia quadro FX 3500, rez works fine at 2560x1600 : absolutely perfect !!
    OS : win Vista Ultimate 32bit