UNSOLVED

bi9foot

updated

20 years ago

B

bi9foot

4 Posts

0

14486

March 16th, 2007 17:00

2407 rev A04 overdrive issue

Hi, Just got a new 2407 A04 and the overdrive is extremely irritating when scrolling web pages etc. Any way I can turn this off or reduce it. It seems to be worse in Desktop mode, It is not as bad in multimedia mode. Thanks
  • Rlrood

    13 Posts

    691

    0

    Posted March 16th, 2007 19:00

    Probably a dumb question, but what is the overdrive feature you're referring to?  Thanks.
  • 691

    0

    Posted March 16th, 2007 19:00

    Sounds like you're talking about ghosting. Ghosting is when you see a trailing after image.
  • bi9foot

    4 Posts

    691

    0

    Posted March 16th, 2007 20:00

    Check out this tread: http://www.dellcommunity.com/supportforums/board/message?board.id=dim_monitor&message.id=65019&query.id=138325#M65019
    There is a test image as well. Open in up on a web browser and move the browser around you screen. You will see a purplish or greenish shadow/edge following the grey area of the image. Normally, one would only notice it when moving a window around but this is too much since it shows up when scrolling through a web page.

    Message Edited by bi9foot on 03-16-2007 04:35 PM
  • Wired-DK

    9 Posts

    691

    0

    Posted March 17th, 2007 11:00

    Have you tried changing the monitor's default color settings? I noticed trails when scolling web pages on my 2407 as well, but after changing the color settings the problem totally disappeared.
  • DrFaygo

    4 Posts

    691

    0

    Posted March 19th, 2007 01:00

    I have the same problem. The problem is fixed to a degree when I adjust the colors from 100 down to around 85. I do not like this, as it is a hack, I want the whole monitor to work. I'm considering a refund, and you?
  • farrellart

    16 Posts

    691

    0

    Posted March 19th, 2007 17:00

    DrFaygo, You want a refund because you have to adjust the monitor's colour settings to get the best output. Seems odd to me as some tweaking is required for most set-ups.
  • DrFaygo

    4 Posts

    691

    0

    Posted March 19th, 2007 20:00

    It is because I need to drop my color saturation down to 85%.  I may not be able to get accurate colors with the levels set this low.  I need to test this out.  However- if my colors are too unsaturated then I will be very disappointed.
     
  • Dehl

    29 Posts

    691

    0

    Posted March 19th, 2007 22:00

    Out of the box, the A03 revision seemed to require little or no adjustment; it just looked great. However, I've found that revision A04 requires a fair amount of adjustment, at least to get it to look comparable to the A03. With a colorimeter, my particular panel required the following adjustments (for DVI the input):
     
    Brightness: 24
    PC Custom
    R: 94 (just one click below 95)
    G: 94 (plus one click higher)
    B: 95
     
    Other panels may vary. I recommend buying a Spyder2 colorimeter (or something similar) if you're picky about colors.