UNSOLVED

ivand67

updated

20 years ago

Closed

I

ivand67

30 Posts

0

5162

August 25th, 2006 07:00

USB ports don't work after disconnecting USB hub on Inspiron 5150

I'm having this exact problem described on the Microsoft knowledge base article linked below, but this problem supposedly only happens with SP1 - it's fixed under SP2 and the hotfix available does not run on SP2 (it tells me it's supposed to run only on SP1):

http://support.microsoft.com/?kbid=810400

If you unplug all your Universal Serial Bus (USB) devices from the host controller, the host controller may not respond when you plug these devices in again. Additionally, after you remove all these devices, your computer may stop responding (hang) during the shutdown process. This problem is more likely to occur if several USB hubs are cascaded and USB devices are connected to the cascaded hubs.

I have Windows XP Pro SP2 on my almost 3 years old Inspiron 5150. This happens sometimes, but it's been happening more and more often lately.

I have a generic, non-powered USB hub that I use in my living room and one powered generic USB hub in my bedroom. The computer hangs when I try to reboot, just as described above.

Very annoying. SP2 supposedly fixed this. Is it my computer having hardware issues? Is this maybe a sign that the USB ports are gonna stop working soon? :(

Help would be greatly appreciated. Thanks in advance.

(Bravo to Dell for not allowing BBCode OR HTML links on here) :rolls eyes:
  • charokee

    79 Posts

    212

    0

    Posted August 25th, 2006 10:00

    First thing you might wanna do is backup your data and maybe think about doing a fresh install of windows or Image Restore......depending on which one you have.......if you never got CD's with the computer then theres image restore (Ctrl + F11 when computer boots and you see www.dell.com on the top of the screen)
     
    If that doesnt fix the problem......try a different USB port OR maybe even go and get a PCMCIA USB 2.0 card.........at least to take stress off the ports built into your system
     
    At the very least.......do a diagnostic on your motherboard with the 32bit diags ---> Custom Test
     
     
    hope that helps