UNSOLVED

tonton67

updated

18 years ago

Closed

T

tonton67

1 Rookie

•

14 Posts

0

114877

November 24th, 2008 18:00

Studio 1535 not booting properly

I just bought my new Studio 1535 and it has not worked right since I got it. When  I try to boot my computer cold, I get the Dell screen but before it can load Windows, I get a light (the high speaker light) that comes on and stays on. I get a black screen with a flashing cursor for several minutes and then it starts beeping a steady beep. It will beep for several more minutes, and then I will either get a screen that asks me which operating system I wish to load (I only have Vista) so I select Vista. Other times, it just gets silent and then after a few more minutes continues beeping again until finally it loads. This does this about 70% of the time I try to boot when it is cold (down for more than an hour or so).

This is a real problem because I cannot start my computer when I am in a meeting or anything, because the beeping is so loud and disruptive. It has rendered my computer virtually useless in many circumstances. I have spent about 20 hours on the phone with tech support,  which has been a complete waste of time. Everyone keeps telling me the problem is memory, but they have run all of the diagnostics on the memory and everything checks out. I am at my wits end. Any help would be appreciated.

  • TheRealFireblad

    4 Apprentice

    •

    4639 Posts

    1180

    0

    Posted November 25th, 2008 00:00

    Welcome to the forums :emotion-5:

     

     

    If tech support can't help you resolve the issue, and you've had it less than 21 days, you can ask to return it for a (brand new) replacement - or a refund.

  • Tech7

    39 Posts

    1180

    0

    Posted November 25th, 2008 08:00

    Is your HDMI driver disabled in Device Manager? Any other device conflicts/errors?

     

  • tonton67

    1 Rookie

    •

    14 Posts

    1180

    0

    Posted November 25th, 2008 09:00

    I don't know about the HDMI driver. I will check when I get home, but I do know that there are no yellow indicators in the device driver! We have checked that. So are you saying that it needs to be disabled, or that having it disabled could cause a problem?

  • Tech7

    39 Posts

    1180

    0

    Posted November 25th, 2008 19:00

    I noticed that the HDMI driver was disabled. I enabled it so it would generate an error if it were part of the problem. It did not generate an error, and my system has not been acting up since (not that it won't).

    I would also like to know the manufacturer of the mainboard. Often they list what beeps mean. Also, I was wondering if there is a generic(non-Dell) BIOS available for this system. I'm beginning to wonder if the POST process has bugs.

    I'll continue to research these issues. If you (or anyone out there) have any ideas, I would love to hear them.

     

  • Tech7

    39 Posts

    1180

    0

    Posted November 27th, 2008 15:00

    Would you turn your system on and observe the lights? I'm interested in the ones above the F9, F10, and F11, but let me know any you observe and the flashing patterns while the beeps occur.

    Thanks

  • tonton67

    1 Rookie

    •

    14 Posts

    1180

    0

    Posted November 27th, 2008 16:00

    It is always the high speaker light above the F11 key. It is a solid light, no flashing. The light comes on almost immediately, even before the Dell Screen. It then stays on throughout the beeping.

  • Ruinessx

    3 Posts

    1180

    0

    Posted November 27th, 2008 17:00

    I have had the exact same problem since i bought my 1535. I also contacted customer support and after them running the diagnostics and barely being able to understand the service rep, they proceeded to tell me there was absolutely nothing wrong and that the only thing more that i could do was to wipe my hard drive and reload everything on the computer. right! after i have spend how much time uninstalling all the they put on here, even after i told them i wanted absolutely no software installed what so ever. I am extremely irritated with this problem and at times, it renders the machine almost useless. can anyone help?!?!

  • Tech7

    39 Posts

    1180

    0

    Posted November 27th, 2008 18:00

    Can you post a run-down of everything your tried with the tech(s)? What are your lights doing durring the beeping?

  • Tech7

    39 Posts

    1188

    0

    Posted November 29th, 2008 07:00

    It looks like we have the same problem. I am contacting dell today to see what the error indicates. I'll update you as soon as I know more.

     

  • Tech7

    39 Posts

    1146

    0

    Posted November 29th, 2008 11:00

    Alright, Here's the scoop so far... Since we get a Dell Screen, we know that the POST (Power ON Self Test) is done and the hardware is okay. The error is hapening as the MBR (Master Boot Record) is being prosessed. This is where the BIOS is passing control to Vista. If you want to better understand the boot process, check out  http://ezinearticles.com/?Windows-Vista-Boot-Process-Overview&id=794745 .

    I reloaded the Dell disk image(original software) as an attempt to correct the issue. Give me a couple of days and I will post my results.