UNSOLVED

doobu1

updated

22 years ago

Closed

D

doobu1

6 Posts

0

75727

October 5th, 2004 21:00

Pentium M 1.6GHz Always Operates at 600MHz on Latitude D600

I have a Latitude D600 with a Pentium M 1.6GHz processor installed with the latest BIOS (A14). I have done a fresh install of Windows XP and installed all the latest service packs, fixes (including the SpeedStep fix for Windows XP), and drivers. My problem is after 5-10 minutes from the first time I turn on my laptop for the day the max clock speed stays at 600MHz even though my laptop is on AC power and I have the power scheme set at Always On or Home Office/Desktop. Even if I try to change the Speedstep control with SpeedSwitchXP the max speed still stays at 600MHz. And I've tried the Fn+Z trick to reset the max speed to 1600MHz but about 30 seconds later the max speed reverts back to 600MHz. I'm wondering what the problem is and how can I actually get 1.6GHz speed especially when I'm on AC power.

  • vpresley83

    2 Intern

    •

    307 Posts

    1425

    0

    Posted October 6th, 2004 02:00

    Hi

                      Try downloading the Intel CPUID utility and see what specs it gives. 

                                                                                        Vince

  • doobu1

    6 Posts

    1425

    0

    Posted October 6th, 2004 03:00

    It says expected frequency 1.6GHz, System Bus - 400MHz and for reported frequency it says 0.59GHz and for system bus it says 398 MHz. What's the point of finding out the specs of the CPU? I know that it's a 1.6GHz Pentium M processor.
  • vpresley83

    2 Intern

    •

    307 Posts

    1441

    0

    Posted October 6th, 2004 10:00

    Hi

        The Intel CPUID utility gives you a more in depth info on the CPU.  Plus its a double check of XP info.  If the settings are not changeable in the BIOS, sounds like you have a defective CPU, or Mobo problem.

                                                                                Vince

  • PorBleemo

    31 Posts

    1441

    0

    Posted October 6th, 2004 21:00

    Sounds like a problem with the ACPI Power Management. Make sure Power Mangement is set to Auto in the BIOS.
  • doobu1

    6 Posts

    1441

    0

    Posted October 7th, 2004 05:00

    There is no option for ACPI in the BIOS so I'm assuming it's automatically enabled. I've heard other users have problems with their Pentium M chips not going faster than 600MHz. Is it possibly a temperature problem?
  • PorBleemo

    31 Posts

    1441

    0

    Posted October 7th, 2004 11:00

    Sorry, I meant SpeedStep option. All PentiumMs will slow down to 600Mhz at minimum with SpeedStep enabled. In mine I have SpeedStep options for: Automatic (change between AC and Batt), Max Performance, Max Battery. I would make sure that it set to Auto.
  • doobu1

    6 Posts

    1441

    0

    Posted October 7th, 2004 20:00

    The only options for Speedstep are enabled and disabled. And I have it enabled, but if you disable it the processor will run at the slowest speed (600MHz). And even though I have Speedstep enabled the processor, besides maybe the first few minutes when first turning on the laptop for the day, always operates at 600MHz MAX.
  • TDunn

    379 Posts

    1441

    0

    Posted October 8th, 2004 16:00

    Use this:  SpeedSwitchXP

    ..................TD

     

  • doobu1

    6 Posts

    1441

    0

    Posted October 8th, 2004 20:00

    I do use Speedswitch XP. It doesn't help
  • TDunn

    379 Posts

    447

    0

    Posted October 8th, 2004 22:00

    Sorry.....browsed right past that in your first post.

    Have you loaded everything yet....system software, chipset driver, speedstep fix for winxp??

    ..............TD