UNSOLVED

dcodea

updated

22 years ago

Closed

D

dcodea

7 Posts

0

17352

April 5th, 2005 04:00

Inspiron 600m Overheats out of the box

I received an Inspirion 600m, and right out of the box, with the raw Dell factory settings, I cannot rest my left ahnd on the palmrest once it's been on for about 10 minutes. It burns my skin. I basically cannot type at all. Is this standard? What can be done about this?
  • Akashra

    17 Posts

    317

    0

    Posted April 5th, 2005 04:00

    Not that me asking any of this will help solve the issue, but I am curious:
     
    Do you happen to know if there's a 4200RPM or 7200RPM HDD in your 600m?  I find it odd that that area of the notebook would get that hot with only a 4200RPM drive...
    Other areas of the notebook (such as the memory compartment and wireless card in particular)  also get particularly hot in mine.
  • NemesisDB

    2 Intern

    •

    7944 Posts

    317

    0

    Posted April 5th, 2005 04:00

    no dell product should physically hurt you.  if it's under 21days from invoice, i would return it for a refund.  if not, see what dell tech support can do for you
  • dcodea

    7 Posts

    320

    0

    Posted April 5th, 2005 05:00

    I've now tried to crank the fans with Fangui, and I get "can't chnage Fan2 speed" errors.

    So hmm.
  • dcodea

    7 Posts

    320

    0

    Posted April 5th, 2005 05:00

    When running FAngui, I got a 'can't read fan status 2' error- could this be a smoking gun?

    Temperature for the HD is listed as 47c, cpu is 40c. Is that hot?

    Message Edited by dcodea on 04-05-2005 01:17 AM

  • dcodea

    7 Posts

    317

    0

    Posted April 5th, 2005 05:00

    It's a 5400 hard drive. I'm finding more stuff about this on the forum, apparently its a problem... Maybe I'm just more sensitive, but it really bothers me.

    Is there any good way to deal with this?
  • NemesisDB

    2 Intern

    •

    7944 Posts

    317

    0

    Posted April 5th, 2005 05:00

    you can get fangui and rev the fans to max, which will cool the cpu a lot and everything else a little

    it's not a good solution though.  HDs are variable in their heat output, I would try for a replacement

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    320

    0

    Posted April 5th, 2005 09:00

    That's because there is, unlike the i8200 for which the program was written, only one fan.

    The 8200 has two fans - the D600/600m has only one.
  • dcodea

    7 Posts

    320

    0

    Posted April 5th, 2005 14:00

    well so much for that theory. Dell is sending me a label to mail it in, but I suspect they will tell me that's just the way it is.
  • dsbInspiron

    222 Posts

    312

    0

    Posted April 5th, 2005 15:00

    That is pretty hot for a hard drive that has only been running for 10 minutes.  What exactly is going on in that 10 minutes, anything real intensive with the hard drive.  My 600m only hits those temps when am gaming for a couple of hours straight (usually hits 46C max), even then it is not unbearable on the palm rest.  Hopefully they will replace the hard drive, sounds like it may be malfunctioning or something is running you don't know about that is using the HD!

     

    db

  • NAB622

    2 Intern

    •

    229 Posts

    320

    0

    Posted April 5th, 2005 15:00

    You should never be burned on a computer unless you touch the memory compartment after running it for a half hour or so. It it keeps up, you may end up with severely damaged internal components.