
UNSOLVED
Closed
Inspiron 5150 Touchpad/Cursor Not Functioning Properly
Model: Inspiron 5150
OS: Windows XP
Latest touchpad drivers, Windows Software Updates
We purchased the Inspiron 5150 and have had similar problems with the touchpad/mouse. The mouse moves very slowly sometimes. When moving your finger from left to right the mouse moves in a "v" shape on the screen, also when you move your finger from bottom to top a similar non-straight movement happens with the mouse. On an older Dell model I could bend my finger and use my knuckle to move the cursor, not so with this new Insiron 5150, and that is when the setting is on the highest sensitivity. After calling tech support and a tech replacing the touchpad/palm rest once, the problems have come back. The new one worked for about 2 or 3 weeks, but has been malfunctioning ever since.
By the looks of this thread, we aren't the only ones experiencing these problems. When Dell can replace our shoddy touch pads with ones that work, I'll be first in line. Until then, I'll keep calling tech support and run through their mouse tests that don't check for this kind of failure.
O. Edenfield
The Dickey Group Inc., Realtors
Hillsboro, OH
Responses (60)
Solutions (0)
- I got my 5150 less than day and had to reinstall because I forgot the password for my antivirus. I found the default touchpad driver is so much responsive than the pre-installed 5150 image.. I didn't notice the caplock was on until I started installing XP again.
- try to download and reinstall the touchpad driver. I did that and it's working right now. In addition, if you bring up the mouse property and device setting/setting, you can do a whole lots with the touchpad. You'll like it at the end.. Good luck...
- I'm having a similar problem with my Inspiron 5150. When I attempt to move the cursor in a straight line it moves in a sort of wave motion (it dips in some areas and jumps in others). I'm not having any problems with sensitivity or speed, but this erratic movement is very annoying. I was thinking about having the palmrest replaced, but you say that didn't work in your case. Did it fix the "V" shape that you were having trouble with? Any other advice would be appreciated. Thanks
We have replaced the palmrest on the 5150 once. Immediatly there was a notice in the operation of the mouse onscreen. But soon after (2 - 3 weeks) the mouse started behaving in the same manner. I have changed just about every setting there is to change with the hopes that one insensitivity or setting will help in using the mouse, but I havn't found anything that really works.
When I get some more time, I am going to call Dell about it again and have them replace the palm rest or whatever they want to do.
MistrBlank
52 Posts
452
0
Posted December 11th, 2003 20:00
I too have a similar problem. I notice that the erratic motion seems to occur when I get to the scrolling side of the touchpad. I disabled that support in the driver settings, but it still occurs. Maybe we can pinpoint more of what the problem might be causing this.
It's very wierd, I did not have this problem until yesterday. This is after I had a new video card installed on a service call (the old one was completely broken) and formated my drive to start a fresh image. Other pointing devices installed do not respond like the touchpad (ie they move like they should and smooth).
-MistrBlank
I haven't tried using an external mouse or anything, frankly, because when you pay for a Dell, you shouldn't have to pay another $10 for something to make it work properly.
In another thread I read about the problem we are having and they talked about BIOS changes, what version of BIOS is everyone running? I've been running A01 and had the problem. Yesterday I upgraded to A23 and still have the problem. Others have upgraded to A28 and have the problem, and some even have went from A28 back to A23 and that seemed to fix the problem for them.
It would be nice to fix this problem.
Orrin Edenfield
Message Edited by orrinrule on 12-12-2003 08:04 AM

DELL-BobT
3125 Posts
452
0
Posted November 20th, 2003 19:00
orrinrule,
Thank you for using the Dell Community Forum.
Have you tried changing the touch-pad sensitivity in the Control Panel?