
UNSOLVED
Closed
Inspiron 510m will not display through projector
Hi,
I cannot get my Inspiron 510m to display through a projector.
I've tried three projectors that all work with another Dell, and I know all about the Fn+F8 and graphics menu options to clone display etc. - but nothing works.
I've even loaded WinXP and Win2K from clean - no difference
Responses (4)
Solutions (0)
Hi Spiked_Martini,
Thanks for coming back.
No the computer is not detected by the projectors - they report 'no signal' and the projector display doesn't even flicker when the switch is made on the PC. With my other Dell - the projectors fire immediately thay are plugged in - but with this one - nothing at all.
I've used all the latest drivers and BIOS update from the Dell site - and even tried a later Intel video driver available on their site - no difference.
I haven't tried any third-party drivers - wouldn't know which ones to use - and I shouldn't really need them should I ????? It looks like a hardware problem.
Thoughts ...................
Thanks
Martin
MBrown1003
30 Posts
176
0
Posted February 14th, 2005 23:00
Same problem here....one additional wrinkle. It all worked fine (display on the projector) first time I tried if. After that, I attached a CRT to the monitor jack so I could have an additional display. Since doing that, there seems to be no way to convince the machine to go back to a single desktop and present that signal on the jack.Update.....
After a response from Dell, I now have a full display to an external monitor - but still nothing to any of 3 separate modern projectors.
So it looks like a driver, rather than a hardware problem - but it makes the Inspiron 510m a no-buy piece of equipment if you want to connect to a projector - I'm going to start warning people of this as there doesn't appear to be a solution - apart from buying another make of laptop.

spiked_martini
1 Rookie
•
948 Posts
176
0
Posted February 14th, 2005 16:00