
UNSOLVED
Inspiron 5100 Really Dead Battery or Death of the Computer
I have an Inspiron 5100 that was working ok when I set it aside to get my new laptop set up. It probably was unplugged with battery in for a couple two or three months. When I plugged it in there was a brief green light then nothing and after leaving it plugged in overnight still nothing. I have removed the battery and put it back and still nothing. I have removed the battery and plugged it in and nothing. Is it the battery is just completely dead and will not take a charge or is something else going on? Wondering what to do? Thanks glowabout
Responses (3)
Solutions (0)
In this case, this may not work, but it is worth a try, assuming you can start the computer up with the battery in and the power cord plugged in
1. Click Start and type device in the search field, then select Device Manager.
2. Expand the Batteries category.
3. Under the Batteries category, right-click the Microsoft ACPI Compliant Control Method Battery listing, and select Uninstall . WARNING: Do not remove the Microsoft AC Adapter driver or any other ACPI compliant driver.
4. On the Device Manager taskbar, click Scan for hardware changes . Alternately, select Action > Scan for hardware changes.
OR just shut down and start up againIt worked for me. I have XP and have had read of people with VISTA and Windows 7 having the same problem. Be sure you uninstall only Microsoft ACPI Compliant Control Method Battery, not any other ACPI devices.
dallascowboyswo
4 Apprentice
•
2380 Posts
688
0
Posted February 11th, 2011 09:00
If unable to boot. Remove hard drive, cdrom drive, memory and pccard devices. Plug in the power adapter and hold down for thirty seconds. Remove a/c adapter and insert memory one stick at a time trying one slot at a time. Plug in a/c adapter and see if you can get it to POST with memory. If you get a POST beep then put back one device at a time until you get a successful boot.

kirkd
6 Operator
•
5241 Posts
688
0
Posted February 2nd, 2011 11:00
If a Lithium battery is allowed to discharge completely, the charge level could drop below a certain minimum level. The charging circuity in the battery will not allow a battery below this level to charge because of the possibility of an explosion. The battery can not be (cheaply) repaired if this happens.