
UNSOLVED
Closed
Far Cry on I8600 with ATI 9600
Well, "Far Cry" was the first FPS game I was trying on my 8600 after having owned it for 6 weeks.
When I tried to let the game auto-detect my video capabilities, it listed everything as Low!! Not happy with it, I manually selected High setting under the advanced video options, with AA on. But the game would only run for around 10 mins before it locked up and refused to respond. Only way to recover was to remove the battery from the laptop before a system reboot could take place.
In order to play more I had to turn off AA and set graphics details to Medium. Even then the fans were really howling like crazy.
I suspected that it could be an overheating issue on the GFX card. However from what I have read from others' experiences, they could play FPS games on similar configuration as mine with not much problems in high quality mode.
Is "Far Cry" really that taxing on the hardware? Has anyone tried it on an I8600 before? What level of graphics details did you set when you play the game?
Thanks.
When I tried to let the game auto-detect my video capabilities, it listed everything as Low!! Not happy with it, I manually selected High setting under the advanced video options, with AA on. But the game would only run for around 10 mins before it locked up and refused to respond. Only way to recover was to remove the battery from the laptop before a system reboot could take place.
In order to play more I had to turn off AA and set graphics details to Medium. Even then the fans were really howling like crazy.
I suspected that it could be an overheating issue on the GFX card. However from what I have read from others' experiences, they could play FPS games on similar configuration as mine with not much problems in high quality mode.
Is "Far Cry" really that taxing on the hardware? Has anyone tried it on an I8600 before? What level of graphics details did you set when you play the game?
Thanks.
Responses (14)
Solutions (0)
Billy Jingles
161 Posts
893
0
Posted March 28th, 2004 16:00
I have Far Cry also, performs nicely on my desktop (quick specs: AMD 2400+/GeForce 4 Ti 4800/512MB DDR 333) at 1024x768, High settings, no AA.
RandomTrend
19 Posts
893
0
Posted March 28th, 2004 19:00
far cry is a hardware heavy game...more ram might help....a gig is becoming the standard for todays games.
make sure you have enough space on your drive...defrag may help a bit to...reinstall directX 9.0b..the usual.
you may want to blow some air through the notebook...try to keep the fan blades still tho...don't wanna trash 'em
have you "bumped" the notebook hard enough to dislodge a heatsink/pipe maybe?
and turn of any background tasks that may be running...
note:i've also heard that tuning off hyperthreading increases the core temp.
health
- yes, farcry is a VERY intensive game. Also the R9600 Pro Turbo is nice... i have it, but it is around the speed of a R9600 non pro desktop version. Personally gaming with the 8600 and R9600 i have found running 1024x768 medium details no AA or AF to be the best in my games.
CoD, UT2k4, BFV and Farcry Demo. Billy Jingles
161 Posts
916
0
Posted March 29th, 2004 04:00
You can also go into the game's config file (forgot the filename), and change the renderer from "Direct3D9" to "OpenGL". That gave me a HUGE speed boost.budgie2012
25 Posts
916
0
Posted March 29th, 2004 07:00
I played FarCry and finished it on my I8600 1,4 GHz with Geforce5650 and 1GB Ram!!! Runs really good, no crashes so far, sometimes hanging a little, but I think thats a problem of my mouse driver, because walking with the keyboard works without hanging, just the mouse doesn't work for half a second.
I set almost everything to medium, but I turned the water settings to ultra high, resolution 1280x800, so I have around 40 fps. I tried everything at high with 1680x1050, but then the game runs very slow (no wonder), but for me the quality increase wasn't that much. I love the graphic quality with my settings!!
- Thanks to all who have replied. At least now I know I did not have a faulty unit.
But the heat is quite an issue. Using I8kfanGUI I saw that the GPU temp went over 100 deg Celsius. Looks like I will have to look at some cooling solution to minimize damage to the hardware. - Well I can tell you the following.
I played the whole full game trough completely and the game ran pretty nice.
Although the VERY HIGH setting was a bit too much for the laptop so I set verything to HIGH and the water to ULTRA HIGH cause the reflexions are just too good to miss. AA was off as the performance hit is too much.
With this settings I can play for hours on and on no problems at all. The fans are at full speed naturally as loads of heat is produced.
As I said, Farcry played very well with this settings and I had no problems at all.
BTW there is a patch to version 1.1 out now. Maybe that solves some of your problems
Cu
StarSheep result with my FX5650 :
first , i try the game with all the default setting from install, 1024X768 AA was off, most of detail was MED. game play was excellent, 35 fps
then i set resolution to 1680X1050 ,turn AA on , set water detail to very high, and keep all other setting at MED, game start, but fps was between 4 and 6 OUCH ! , not playable .(slide show )
the setting who decrease performance is high resolution in my case , when back to 1024X768, game play became excellent, 20 to 30 fps, even with AA turned on ,and water detail at high.
the game type is also excellent ( like it more than HALO ), because i like real environement situation.
my P4 2.6 gig desktop with RADEON 7200 32M cant run the game, even with everything set at low, 800X600 , the game crash !
- ggtronic,
What drivers are you using with farcry because I am trying the 56.72's (with Pieter's inf mod from www.laptopvideo2go.com) and although the speed is fine, I keep getting certain parts turning red or green. For instance, a table might be solid red, or a tree trunk solid red, move a bit then it's solid green. Sometimes it's when things are far in the distance, othertimes I can be on top of them.
I've been using all low settings even down to 800x600 res. I have tried just about every other config up to all high with aa, always the same.
Any ideas? What settings do you find work best for you?
Rhi

carvi423
28 Posts
893
0
Posted March 28th, 2004 14:00
hi, i have played far cry demo, with the same system as you, and with a configuration of very high in all except in filtering textures at low and especial effects at medium, and without aa, and i played it for about 2 hours without any problem, i recomend to install fangui program to look at your temps, here is the link:
http://www.diefer.de/indexe.html.