UNSOLVED

szabozo

updated

16 years ago

S

szabozo

3 Posts

0

14273

August 13th, 2010 18:00

E6410 and input monitoring

Hi all,

I have a Dell E6410 with IDT 92HDxxx driver R267823, version A12 (5.10.0.6281). I run Windows XP.

I'd like to hear my mic in order to play karaoke - so I woud need input monitor slider in my Volume Control (audio mixer).

I've done what Jimco mention in his recent advise to change registry,  but no success.

I have to tell, that I have part 0015 and 0024 part in the registry with slightly different content.

For Input Monitor I had to change the following parts:

HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}\0015\Settings\filter\rear
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}\0024\Settings\filter\rear
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}\0015\Settings\filter\rear
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}\0024\Settings\filter\rear
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}\0015\Settings\filter\rear
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}\0024\Settings\filter\rear

After reboot, although Input Monitor appears in the mixer, but it is muted, and when I try to unmute it, the XP crashes with a blue screen of death.

The blue screen sais: DRIVER_IRQL_NOT_LESS_OR_EQUAL

Any idea to solve the issue?

 

Another interesting thing is that "RecMonitorMute" what is recommended also to be changed, is missing from the 0024 sections, and when I put it in there, XP crashes already when it starts. So I had to reinstall original driver in safe mode.

Cheers, Z.

  • szabozo

    3 Posts

    285

    0

    Posted August 13th, 2010 18:00

    *

  • Jim Coates

    6 Operator

    •

    13582 Posts

    285

    0

    Posted August 14th, 2010 05:00

    The instructions that I have put up came from people who have certain audio drivers installed on their computers and figure out the Registry changes necessary to enable monitoring when using those drivers. If you are trying to apply Instruction Set 5 those directions are for the R213367 driver. You could try to install that driver on your computer. Sometimes a driver will work on a model it was not meant for. You would need to delete all other IDT drivers from your hard drive before attempting to install the R213367.

    My own laptop is rather old and cannot use any HD driver so I cannot experiment with them as you are doing. If you develop a solution please let me know so that I can include it in the instructions..

  • szabozo

    3 Posts

    285

    0

    Posted August 14th, 2010 07:00

    Hi Jim,

    Thanx for the advice, it switched on my brain :o)

    I have downgraded to A11 driver, and wow, it works.

    Shame again on  IDT and Dell!

     

    Only 2 things have to be done in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}\0024\Settings\filter\rear:

    1. Find a key named "EnableIntSpkrMute" and change its value from 01 to 00.

    2. Create "DigitalInputMonitor" as a new binary value with 01

    That is all.


    Thanks again,

    May the force be with you! :o)

  • Jim Coates

    6 Operator

    •

    13582 Posts

    285

    0

    Posted August 15th, 2010 13:00

    szabozo,

    Thanks so much for this. I have included it as a new instruction set in How to Enable Input Monitoring. If you get a chance would you mind looking at it and see if it is correct. My brain is getting a little foggy and its easy to overlook obvious errors. Thanks. And perhaps delete the text of your post there which might be confusing to others (the edit icon at the bottom). The thread used to be locked to prevent replies but there is a glitch now in the forum which allows me to lock the thread but be unable to unlock it when I need to edit it, so I have to leave it unlocked.

    May the force be with you! :o)

    And with you.

  • 285

    0

    Posted October 16th, 2010 17:00

    {$content}


    It's helpful to me, Thanks for your sharing!