
UNSOLVED
Closed
Can't get s-video out to work as "clone" monitor
Connecting laptop to TV using s-video cable and I can't get s-video out to drive the TV as a "clone" monitor. I can get s-video to work as "extend Windows desktop onto this monitor", but that's not what I want to do. I simply wish to have the TV set display whatever is displayed on the laptop screen. I've tried Fn F8 and that doesn't do anything except cause a "flicker" on the TV. I can't find any place within control panel/display/settings to set up 2nd monitor as a "clone" of the primary monitor.
System: Inspiron 600m, XP Professional, video card is "Mobility Radeon 9000". Driver is (supposedly) most current.
Update: I discover that if I close the lid to the laptop (thus shutting off the laptop screen), the TV does display what is (was?) on the laptop screen. However -- it is in black and white, not color. This is getting weird!! Isn't (or shouldn't) what I'm trying to do be rather simple??
Message Edited by nassdt on 05-31-200607:47 PM
Message Edited by nassdt on 05-31-200609:58 PM
Responses (1)
Solutions (0)

vandalii
43 Posts
170
0
Posted June 2nd, 2006 17:00
Fn-F8 didn't include S-Video out in the display switching cycle on the 600m -- Dell didn't figure that one out until the next year's models.
Here's how to get TV & laptop LCD on at the same time:
1) Display properties -> Settings tab -> Advanced button
2) ATi Displays tab -- will show 4 pictures: LCD, VGA monitor, Digital monitor and TV
3) Activate the TV with that control and apply
You should be in clone mode with LCD & TV. Be forewarned, though, that the resolution on both displays will be limited to 1024x768 since that's all the SVideo will put out. If you have an SXGA+ panel (1400x1050), it may look fuzzier at 1024x768 but that is a limitation of clone mode -- least capable display is what determines capability of the pair.
Hope that helps.
Vandal