
UNSOLVED
Closed
I
ictiosapiens
24 Posts
0
19161
October 24th, 2006 10:00
Can't flash my M1210 Bios in Windows Vista
I've been trying to flash my M1210 to the new A04 bios from within Windows Vista, and I just can't. I get an error, and it refuses to run.
Has anybody else had the same problem???
Has anybody else had the same problem???
Responses (8)
Solutions (0)
ictiosapiens
24 Posts
475
0
Posted October 25th, 2006 10:00
Yep, tried that. Same error.
oh, and my Vista is RC2.
RegardsWolverineMachin
367 Posts
475
0
Posted October 25th, 2006 18:00
Gotcha, huh? My M140 did a bios flash in RC1. Have RC2 now but didn't flash it. I know it's not the 1210 so I'm not sure on that one.- Why do you need to flash the BIOS? What many people don't understand about flashing the BIOS is that the only reason to do so is compatibility issues. I've seen people royally screw up their BIOS and have to literally replace the chip on the motherboard. Unlike driver upgrades, which can provide with upgrades in speed and functionality that many people use, unless you are having a hardware problem such as device connection problems I would not flash the BIOS. Do whatever you want. Good Luck!
ictiosapiens
24 Posts
475
0
Posted October 28th, 2006 15:00
Well, it says on the bios info page that there's improved high definition audio device performance. And believe me, that is the only area where this computer really needs to improve. It also says that there's improved compatibility on Vista, so I thought it couldn't harm...- Good call. I've had problems w/ Dell drivers for Vista, so you might not be able to do it until it's official release. Right now my printer refuses to load, and my sound card drivers won't work. I don't know if you can flash your BIOS from a flash drive with Dells, but that would bypass the OS altogether, which would work. Good Luck!
- Can't flash here either.Vista Ultimate Retail.I will try again tonight with UAC turned off. (You would be amazed at how many application installers that fail under Vista, work perfectly with UAC turned off. Turn it back on after installation is complete.)"Cancel or Allow" :)
- The bios flash has nothing to do with the OS .The format of the bios flash is not meant for windows enviornment at all .Dell should mention the same on its "award winning website ".The process to flash is as followsCopy the bios update exe file to a USB Key ( now a days every one has one)Insert Dell Inspiron Resource CD ( it is also called Dell System software Cd please look on the cd cover)Restart the systemAt Dell Logo Screen , press F12 Key ( Function row F12 )Select boot from CD/DVD Rom from Boot MenuThe system would prompt for pressing any key ...Press Q to exit to DOSSelect the drive letter for USB key ( now it needs a bit to hit and trial for my system the usb key took the letter C)so type C: ( please ensure that colon is put after typing the drive letter of the usb key)check whether the file is there or not by typing dir and hit enteronce found at the prompt type the file name of the bios update and the bios would get flashedRegardsXPS Dell

WolverineMachin
367 Posts
475
0
Posted October 24th, 2006 14:00