noogen

updated

12 years ago

N

noogen

8 Posts

0

275698

May 30th, 2012 17:00

XPS 8500 2nd sata 3 port or not?

I read that the XPS 8500 SATA port 5 is the 2nd SATA III, but Intel Rapid Storage is reporting it as SATA II with my drive.  I've tried all the ports and the only port that is reporting SATA III is port 0.  Anyone else seeing this?  My desktop is the new XPS 8500 (i7-3770) with 2 x agility 3 240GB SSD in raid 0.  I'm running latest bios A05.

  • DELL-Royan S

    6 Operator

    •

    3802 Posts

    5339

    1

    Posted June 1st, 2012 11:00

    Hi,

    I apologize on Dell's behalf. There is a mistake on the online manual, and we have reported to the product team. Below is the actual configuration off our training manual for the XPS 8500

    This system has 1 x Sata Revision 3.0 (SATA 6 Gbits/s ) and 3 X SATA Revison 2.0 (SATA 3 Gbits/s ) Connectors. The following table illustrates the SATA Port Configurations.

             SATA Revision                                           Connector
    SATA Revision 2.0 ( Sata 3 Gbits/s )       SATA1, SATA2 and SATA3
    SATA Revision 3.0 ( Sata 6 Gbits/s )                     SATA0

    Thank you

  • noogen

    8 Posts

    5339

    0

    Posted May 30th, 2012 17:00

    Thanks osprey for checking.  

    Yes, on page 21-22 of the manual it said arrow 16 (port 1) and arrow 20 (port 0) are 6GB/s.  And yes, there are only 4 SATA ports and 1 mSATA ports.  Port 1 is actually being reported as as port 5 in Windows.  So it's actually Port (1/5).  I'm only getting 3GB/s for this port.  I've tried all the other ports and even swap the cable between the two drive to make sure.  I'm going to try ATTO test to compare my result with another system (optiplex 990) that is also running 2x agility 3 in raid to to compare.

  • noogen

    8 Posts

    5339

    0

    Posted May 30th, 2012 17:00

    ATTO Disk Benchmark result 2x Agility 3 in raid 0.  Write - Read

    XPS 8500: 540474 - 552841

    Optiplex 990: 1050114 - 1065748

    One of my drive is definately running in SATA II because that's really bad performance.

  • osprey4

    6 Operator

    •

    34230 Posts

    5339

    0

    Posted May 30th, 2012 17:00

    Hi Noogen,

    The manual shows SATA ports 0 and 1 are 6GB/s. But then, in the manual, I'm only seeing four ports.

  • osprey4

    6 Operator

    •

    34230 Posts

    5339

    0

    Posted May 31st, 2012 06:00

    I'd report this back to tech support.

  • AC8

    2 Posts

    5339

    0

    Posted May 31st, 2012 12:00

    I just received my XPS 8500, and I can confirm that I'm also getting only SATA 2.0 (3GB/s) on SATA connector 1 (port 5, the one physically below connector 0 on the MB), contrary to what's stated in the manual. I do get SATA 3.0 (6GB/s) on SATA connector 0 (port 1).

    Any fix for this issue?

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    5339

    0

    Posted June 1st, 2012 18:00

    Here's another question...

    The specs say the 8500 supports RAID. So if there's only one SATA 3 port, how is it going to handle RAID when one drive is running at SATA 3 and the other at SATA  2 speed?  

    Isn't that going to foul up data transfer speeds since it has to read RAID 0 (striped) files from two drives which are transferring data at different speeds ..??

  • AC8

    2 Posts

    5339

    0

    Posted June 1st, 2012 18:00

    Why in the world would you equip one of your newest PCs with only one SATA 3.0 port, when nearly all new computers have at least two (and some more)? Not cool at all.

    Also, I believe at one time Dell advertised that the XPS 8500 had two SATA 3.0 and two SATA 2.0. Looking at the Dell site now there's no mention of any SATA ports (was it deleted?), but if you look at partner sites (like the 8500 at Costco at http://www.costco.com/Browse/Product.aspx?Prodid=11758872) you'll see it's still listed as two SATA 3.0 and two SATA 2.0.

    What's the speed of the mSATA port on the motherboard (if we can find an adapter to convert this to a standard SATA connector)?

    Also, are the PCIe x1 slots version v2, 2.1, or 3.0? If they're fast enough I could buy an add-in dual SATA 3.0 controller.

  • Robert Willis

    2 Intern

    •

    127 Posts

    5339

    0

    Posted June 1st, 2012 18:00

    This needs to be CLEARLY displayed in the techncial specifications on the website !!!! Every review that I have read raves about the SATA Revision 3 support and I just ordered a system and was expecting that ALL SATA ports to be Revision 3. I am considering cancelling the order due to this issue.

  • noogen

    8 Posts

    1808

    0

    Posted June 1st, 2012 20:00

    !!!Face Palm!!! This totally ruin my current RAID setup as you can see from the benchmark above.  No point of RAID because it's only half the speed anyway.