UNSOLVED

bm11618

updated

18 years ago

B

bm11618

3 Posts

0

16666

October 14th, 2008 00:00

XPS 420 with 1505 Wireless Card not detecting anything

Hello,

 

I purchased a brand new XPS 420 with a 1505 wireless N card which was delivered last Saturday.  Everything seems to be working well except my wireless card.   It is not detecting any wireless networks within range.  I also have a Latitude D630 sitting right next to the XPS 420 and it works just fine.    I contacted Dell Chat support and they said I had to connect to a wired connection to configure the wireless connection.  This is not possible.  My home only has wireless coming from an access point in the attic (I could run a wire but it would be a real pain).  Does anybody know why I would need to connect wired to configure the wireless?  My laptop works just fine and I never had to do that.

 

thanks,

 

Barry

  • jlan12

    2 Posts

    1218

    0

    Posted October 14th, 2008 02:00

    The same thing happened to me too and I also could not connect an ethernet cord as well. I was persistent with Dell tech support and after they tried everything, they finally agreed to send a new wireless card and antenna and a technician came the next business day to replace the wireless card. After that everything worked fine.
  • 1218

    0

    Posted October 14th, 2008 02:00

    Barry,

     

    I usually start by asking the most basic questions, which in some cases may be taken as insults by the recepient, but I have had my good share of times when I was trying to figure out what is wrong with my graphics card only to find out I have not yet turned on the monitor! :)

     

    So, after explaining why I'm going to ask this :):

    - Did you hook the external antena and secured the cable with the supplied screws?

     

    Rafa.

    Message Edited by Rafael Polit on 10-13-2008 10:31 PM
  • CustomPC

    10 Posts

    1218

    0

    Posted October 14th, 2008 03:00

    I had the same symptom with mine at first but it turned out to be an operator error.

     

    I connected the external antenna but it was not inserted as far at it should have been. There was no blue LED on the antenna box, but I was none the wiser because i didn't know there was an LED that should have been lit.

     

    I noticed that my my WLAN signal was very weak despite being only 12 feet from the wireless access and it wasn't until i decided to investigate that i discovered the antenna connection was out about 1/4". Once i insterted it correctly my signal jumped to full strength and has been great ever since.

  • bm11618

    3 Posts

    1218

    0

    Posted October 14th, 2008 08:00

    I did connect the antenna securely with the screws and I was getting a blue connection light on the antenna itself.

     

    Thanks for any help you can offer.

     

    Barry

  • CustomPC

    10 Posts

    1218

    0

    Posted October 15th, 2008 03:00


    @bosphorus735 wrote:
    You need a "N" wireless router. I don't think 1505 N wireless card is backwards compatible with a,b,g routers.

     

    Yes, it is backwards compatible.

     

    I'm using my on an 802.11b or g router.

     

     

  • 1218

    0

    Posted October 15th, 2008 03:00

    You need a "N" wireless router. I don't think 1505 N wireless card is backwards compatible with a,b,g routers.
  • 1218

    0

    Posted October 15th, 2008 07:00

    I can confirm its backwards compatible, I have it with a G D-Link router.


    Rafa.

  • bm11618

    3 Posts

    1218

    0

    Posted October 15th, 2008 09:00

    Thanks everybody for your responses.  I am on the road all week this week but when I return home on Friday I will follow Dell's suggestion to connect wired.  I will then get back on chat with Dell and see what they say.  I have a Linksys WRT300N wireless router so 802.11a, b, g or n is not the issue.  I tried forcing b and g on both the wireless card and the router to see if that would help and it did not.  I suspect the card is bad but we will see.

     

    Thanks,

     

    Barry