UNSOLVED

Brian Kilburn

updated

20 years ago

BK

Brian Kilburn

1 Rookie

•

36 Posts

0

6292

August 5th, 2006 17:00

XPS 400 error; Alert! Card Cage fan falure.

Hi,

I've been getting this error on boot up.

Alert! Card cage fan failure.

Well the thing is the card cage fan is running. I could feel the air flow at the vents on the front of the box and opened the box to look. the fans are running.

I cleaned out the accumulated dust, and there was quite a bit at the front of the shroud, considering my computer is only a couple of months old. Checked the cable connection to the mother board.

Still get the same error.

So, at the next boot, I went into the setup utility and cleared the event log just to make sure it wasn't giving me a warning about a previous error.

No change, same error at boot and the fans are still apparently working fine.

Any suggestions would be greatly appreciated.

Thanks

BK

system information;

Dell XPS 400
Windows XP Media Center Edition Service Pack 2
2.80 gigahertz Intel Pentium 4
160 Gig HD w/ RAID 1 and Norton Ghost 10
HL-DT-ST DVD+-RW GWA4164B [CD-ROM drive]
SONY DVD-ROM DDU1615 [CD-ROM drive]
NVIDIA GeForce 7300 LE
  • chama98

    2 Intern

    •

    424 Posts

    193

    0

    Posted August 6th, 2006 12:00

    I had this type of error with my 600! the computer was complaining that one of the processor fans was not working! (it was working)

    the enginner traced the fault to a USB device causing a short and using too much power, it was my web cam causing the problems.

    what I would do is this:

    disconnect all USB devices apart from mouse and keyboard,

    restart the computer and see if the problem is reported again if it is not then plug one usb device and restart the computer, keep doing this until the error happens, the last USB device could be causing the problem.

    for example:

    plug usb device > restart > plug USB device> restart>plug device> restart.

    let us know how it goes.
  • Brian Kilburn

    1 Rookie

    •

    36 Posts

    193

    0

    Posted September 25th, 2006 17:00

    Just wanted to update.

    chama98, I tried the solution you suggested with no result. I still have the same error message at boot up and I am still sure that my fans are working, no matter what the error message says.

    I recently noticed that another person has posted (in another thread) with this same problem. If it keeps cropping up then someone out there must know how to fix it (I hope).

    any suggestions would be greatly appreaciated.

    Thanks,
    Brian