Tokthree

updated

14 years ago

T

Tokthree

21 Posts

0

76592

June 23rd, 2012 03:00

Working on upgrading my Inspiron 570.

So, I'm working on gutting all the parts from my 570 and replacing them with better ones, I only got the 570 as a stopgap measure after my last computer died horribly, I already have a new PSU and GPU and in the next few weeks I'll also be getting a new CPU and motherboard, but here's the hitch;

I cannot afford to buy a new HDD and retail copy of Win7 at this point so I was hoping to use the current HDD and use a recovery disc to re-install my OEM copy of Win7 after putting the new motherboard in so that I don't get any conflicting chipset driver issues, this is my first time doing such a thing however and I'm not sure if it will work the same as re-installing a retail copy of Win7 after formatting the HDD, could anyone please reassure me or tell me where I'm going wrong with my assumption?

Many thanks for any helpful posts

  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    1858

    1

    Posted June 23rd, 2012 04:00

    The Dell OEM  Windows is only legally licensed for the Dell PC (motherboard).  With a CPU and Motherboard change you will need to reinstall Windows, and the Dell is set to only install with a Dell motherboard (BIOS).  You will need to install different chipset and device drivers too - basically totally different hardware.

    You need to check that a non-Dell motherboard will install in the Dell case.  Dell tends to use proprietary and/or undocumented  connections in many models.  It would be easier, with everything you are planning on changing to buy a new ATX case and avoid any problems with the Dell proprietary case.

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • kisianik

    893 Posts

    2107

    1

    Posted June 24th, 2012 17:00

    @OC: You forget little question about exhaust fan (what model) and bigger one regarding changing BIOS chip?

    @Tokthree. Phenom II X4 965 BE is the best you can do, plus decent video card (if you decide insert Video Card, you will need new power supply at least 500-600 watt), with video card sky is the limit, or your valet is the limit. Adding SSD is good, also RAM can be increased to 16 GB (I have 8, and don't see a reason to get more). Cooling: you will need to change exhaust fan (existing one is weak) and processor cooling - this is the minimum, I was able to place 2 X 80 mm intake fans as well. Now, with processor cooling. You must decide which way to go - remove back plate (with screwdriver, you actually can scratch you motherboard and this is the end), or improvise with mounting solution, more headache, but less risk. Also, if your PC is still on warranty, removing the backplate will void the warranty,  upgrading CPU will as well (void warranty) if you tell Dell you did, if you not, no one knows! Once you decide, post it here, and please don't create new topic - it is difficult to find sometimes.

    Also, what the purpose of you PC, gaming? If so, which games, last generation power hungry, or just arcade? If it is video editing, different parts are required.

  • OCMusicJunkie

    1 Rookie

    •

    117 Posts

    2107

    1

    Posted June 27th, 2012 00:00

    Yeah, as a rule of thumb, you are going to notice VERY little difference in performance between the same amount of 1333mhz DDR3 vs even 1866mhz DDR3- I'd go for 16gb of slower RAM over 8gb of slightly faster clocked memory in a snap. Of course there is a point where with a fast enough rig you'd notice the RAM speed become a bottleneck, but that's way beyond what I personally believe any CPU/GPU combo under $1500 is going to reach. 

    As far as the 6Gb/s question- it still depends on if you're talking about buying a HDD or a SSD. A spinning Hard Disk Drive will not show a difference between 3Gb/s and 6Gb/s connection speed on ANY system- it's a gimmick. Your fastest HDD in the vesy best case MIGHT read/write a bit over 200Mb/s- even an exceptional drive like the Western Digital Caviar Black will be more in the 100Mb/s-150Mb/s range. So, the capacity to transmit data at 30x the speed it can be imprinted on or read from the disk makes no gain. Now, with a Solid-State Drive, you will have some slowing from the 3Gb/s connection- given the fastest SSD's right now still only read/write in the 500-600Mb/s range steady speed, but for reasons I haven't read into enough to attempt explaining, they will show a benefit from the SATA III capability. So, knowing that a SATA II or even SATA drive is backward compatible with a SATA III mobo, you'll need to decide whether to go solid-state or traditional 7200rpm spinning drive. And yes, there is mounting space for one additional 3.5" hard disk, or two 2.5" disks if you buy the bracket to stack them online for $10. However, there are only four SATA II plugs in the mobo, so keep that in mind if you by chance go nuts like me and attempt to install 3 storage drives while having two optical drives in place already. :emotion-4:

    Two things I'd mention about the HDDs though-  the flooding situation in Asia last year hit locations where most of the world's supply of hard disks are produced, and inflated prices on traditional hard drives by A LOT. I'm talking probably 40-60% price spikes from their average prior to the disaster. They are slowly moving back down, so waiting doesn't hurt. SSD's weren't impacted in the same way because their production plants were mostly unaffected. Secondly, if you are avoiding the SSD's because of $/GB ratio, you might want to consider simply buying a cheap external drive for your data. It'll be easier to move between future systems, and it leaves the second 3.5" bay inside our i570 case free for SSD use now or down the road.

  • OCMusicJunkie

    1 Rookie

    •

    117 Posts

    1956

    1

    Posted July 17th, 2012 16:00

    @Kis- I'm impressed if you're getting those numbers from OCCT, most people running our chip in aftermarket towers designed for gamers still can't get it to run as cool as both of us somehow have. I have enough faith in Logysis (DeepCool) where I am about to swap the IceEdge for a larger 120mm version since I've swapped over my entire rig into a Thermaltake case that has room. I'm hoping to see idle temps in the mid 20's and stay under 50c for the OCCT test. We'll see....

    @Tokthree- I looked up and down that site. This is your best bet for something less expensive. It's £16 before VAT (not sure if you have to pay that where you are or not). It's a proven company, and the design is very similar to the IceEdge. It also will fit inside our case (confirmed their specs) and the screw pattern matches our mobo's. That's the cheapest I would suggest- I learned after a half-dozen of the "standard" style CPU coolers that blow air downward onto the chip... the reality is for efficient cooling, you need a tower style heatsink that lets the cooling fan blow air directly into the rear exhaust fan and out of the tower. If you can find that sort of design cheaper, hey, no harm in trying something new- but cooling becomes a major performance consideration at some point. There is a reason most of the nice gaming cases come with space for between five and seven case fans....

  • OCMusicJunkie

    1 Rookie

    •

    117 Posts

    1858

    0

    Posted June 23rd, 2012 04:00

    Hey, welcome fellow i570-platform upgrade fanatic. :emotion-21:

    You can use the recovery partition or create a duplicated partition onto a 16gb thumbdrive so long as you have the original motherboard and thus original system BIOS in place. Once the mobo is gone, it's not going to let you use anything from the partition, including loading the windows OS. 

    My advice would be to keep the original mobo for the time being, and upgrade everything else around it. You can go a LONG way with the factory motherboard. Since it sounds like you have a budget anyway, I doubt you are going to be adding any parts that exceed what the Dell mobo can handle (hint: I have about $800 actual dollars spent and god knows what retail value sitting on the factory board). I'd upgrade the PSU, CPU, GPU, and max the RAM out at 16gb before I even thought about a new motherboard, unless you have already purchased a chip that requires a different CPU socket. Then there is even the swap to a hybrid like the Seagate XT 750gb, or better yet, a full Solid-State Drive to run the OS and applications from. All of that is doable with the factory recovery software. 

    If you really want to go into getting a new motherboard, and you're just starting to purchase parts that aren't installed yet, I'd sell the i570 and buy an empty tower to do a scratch build from- you can find nice ones for $50 shipped (Thermaltake has a great looking red/black tower I just picked up for my scratch build here). You're actually going to have an easier time this way; the Inspiron will fetch enough to cover the cost of the case + new Windows OS software easily, and provide a lot more upgrade space and ease. 

    Just my $.02 - Feel free to PM me with any upgrade questions. If it can be done to/with an i570, I've tried it by now. :emotion-22:

  • Tokthree

    21 Posts

    1858

    0

    Posted June 23rd, 2012 10:00

    I would sell it off to cover upgrade costs, but this Inspiron was a gift for a birthday last year since my old PC died literally three days before it, but due to the economy they had to get it on a payment plan, so that isn't an option.

    However, if you'd recommend just buying a CPU for the time being then I can go with that, I'd also be able to afford another HDD then since this one is rapidly running out of space.

    I was looking at AMD CPU's since Intel i cores are way out of my price range, would a Bulldozer work on this motherboard or will I have to go for a Phenom II?

    Again, many thanks

  • kisianik

    893 Posts

    1858

    0

    Posted June 23rd, 2012 12:00

    I was looking at AMD CPU's since Intel i cores are way out of my price range, would a Bulldozer work on this motherboard or will I have to go for a Phenom II?

    Hi

    Unfortunately it is proven that only Phenom II X4 are the strongest processors which can work in 570, someone tried to go 6 cores and failed, so far 965 is the strongest one confirmed twice - by me and OC, you can look though our posts to see answers, the only problem is cooling this CPU, everything else is some what easy.

  • OCMusicJunkie

    1 Rookie

    •

    117 Posts

    1858

    0

    Posted June 23rd, 2012 15:00

    Yeah, the 965 black edition is your ceiling on the cpu- the good news is that it's an easily found and affordable chip right now. I think i solved the cooling headache once and for all if any future owners use the cpu. With the IceEdge 400 cooler, I idle at or under 30c with my upgraded >50cfm rear 92mm exhaust fan. 

    If you can clear some space for the general storage items to sit on the factory hdd, you can get Intel 330 series sdd models dirt cheap right now. Toss a 120gb ssd in for your os and most used apps and you will feel like the system doubled in speed...

  • rdunnill

    8 Professor

    •

    8811 Posts

    •

    35254 Points

    1858

    0

    Posted June 23rd, 2012 15:00

    You can add a third party SATA card before the motherboard swap, install the drivers, and then connect the boot device to the SATA card for the first boot and install the chipset drivers. Afterwards, the SATA card can be removed.

    Although you can reactivate using the 1-800 line, if you swap in a different mainboard you'll be in violation of the OEM license and you should obtain a new Windows key. (Buying an OEM copy from an authorized reseller like Newegg is a good way to get one.)

    I have a Windows 7 install that originated as Vista in 2007 and that I have moved to several different motherboards and chipsets over the years using this technique. However, performance has degraded to the point where it takes 25 minutes to finish thrashing after a boot; a clean install of the OS to an SSD has cut that down to a within a minute. Through that experience, I've come to agree that at some point a clean install is the best option.

     

  • kisianik

    893 Posts

    1858

    0

    Posted June 23rd, 2012 23:00

    Actually I seen 1 person mentioned 975 Phenom working in 570, however he did not mention anything more (cooling problems), so I doubt this fact.

    @OC: Correction, you forget to mention that you had to remove Dell motherboard backplate (due to the broken screw - you had not many choices at that point), after back plate is gone it is relatively easy to mount any Intel 775 socket coolers. Try to persuade someone to remove back plate - this is sounds already too extreme! I happened to install first choice cooler and it is working fine, so now unless it will go bad or I find new extreme solution to speed up processor, I would not change my CPU cooling. One question OC, which exhaust fan you use? And how loud it is?

    Here something to think about, read this post, below is the most interesting thing mentioned, may be you, OC can take a shot here?!:

    "I have recently bought a Dell Inspirion 570

    AMD Phenom™ II X4 830 (2.8GHz, 6MB Cache)  [and] i've overclocked to 3.2"

    "To overclock a dell you need to install a new BIOS chip. It was really long winded but a friend did it for me so i have no idea really."

    How about this? Anyone are willing to try to investigate this issue?! 965 BE reported to be overclocked easy to at least 3.9 if not more, on air only!