
UNSOLVED
C
chrisdaemz
38 Posts
0
12053
October 3rd, 2005 15:00
Video card upgrade failing
When I put it in my new PCI video card my PC (GX260) won't boot and the diagnostic lights give A: Green B:Green C:Yellow D: Yellow. This is not listed in the documentation
http://support.dell.com/support/edocs/systems/opgx260/en/ug/solvprob.htm#1167139
Anyone know whether I might be able to fix this? The card I'm talking about is the PCI version of the Radeon 9250 from Club3D
EDIT: I think it's an IRQ conflict (looking at the diagnostic lights of another DELL PC because it states that when this occurs you have to remove other cards so I assume it has to do with IRQ conflicts). Is it safe for me to play around with the IRQ assignments in the BIOS so I can get this card to work? Because I don't have any other cards in my PC so I can't remove any.
Thanks!
Message Edited by chrisdaemz on 10-03-2005 06:37 PM
Responses (8)
Solutions (0)
chrisdaemz
38 Posts
328
0
Posted October 4th, 2005 19:00
You are kidding me. Is there really no way of getting this to work? I had to get this because those AGP cards with low profile brackets are impossible to find here in Europe. If anyone has some advice please post and otherwise if it's 100% sure that it won't ever work tell me, atleast then I know that there's nothing that can be done.
Thanks
chrisdaemz
38 Posts
328
0
Posted October 5th, 2005 15:00
I've just put it in my Dimension 2200 and it works just fine. Now that I'm sure that the card works is there anything that can be done to get this to work on my GX260?
Thanks for any input!
Message Edited by chrisdaemz on 10-05-2005 06:26 PM
- An AGP card is recommended, but theoretically a PCI card should work.
If it is an IRQ conflict, to test it what you could do is remove the card, go into the bios of the system and disable anything you don't need (e.g. serial ports and parallel port). Then light up all 3 keyboard leds and press alt-e. This last step will clear the nvram. Then exit the bios (to save the settings) and power down to re-add the videocard and see if it does any better.
What chassis size do you have? The reason I ask is that particularly the smaller chassis use (very) low power powersupplies, and maybe this videocard just needs too much. If you have a tower, this definately shouldn't be the problem, unless you have the tower loaded up (maxed drives and several high power pci cards) chrisdaemz
38 Posts
328
0
Posted October 5th, 2005 18:00
I've got the 180W powersupply (I've got the small-desktop case) and that's if I remember correctly exactly the same as my Dimension 2200 so that shouldn't be the problem. I'll try what you suggested first thing tomorrow.
Grtz
- There is NO AGP SLOT on the 2200. There is NEVER an option to install AGP in a 2200. Thats not the case with the GX260. PCI video card upgrades, Dimension V, L, 2100, 2200, 2300, 2350, 2400, 3000. Why? Because there IS NO AGP and Its Not an option. PCI video is the ONLY way to add to these systems same as the Optiplex 170L.
Your putting the card in a system that can NEVER have an External AGP card proves nothing.Message Edited by SpeedStep on 10-05-2005 06:00 PM
chrisdaemz
38 Posts
328
0
Posted October 6th, 2005 10:00
Yes it did prove SOMETHING! I never was sure whether the card even worked properly by putting it in the dimension 2200 I was sure that it worked. And just so you know I know that the Dimension 2200 only has PCI expansion because I've opened it plenty of times before and the video card in there is allready upgraded with a PCI card. When you said that the GX260 only accepts AGP I searched the internet and found that a PCI video card should also work in an AGP enabled PC so now I'm gonna try and hope for the bestGrtzMessage Edited by chrisdaemz on 10-06-2005 01:56 PM
chrisdaemz
38 Posts
328
0
Posted October 6th, 2005 15:00
I got it working! My brother has an GX240 and uses no PCI expansions so I took out his PCI cradle (you have to lift this thing out to install PCI cards) and put it in my GX260 with the Radeon 9250. Now everything works fine. So as it turns out the PCI cradle was defective. Thanks for all the help any way guys!Grtz

speedstep
11 Legend
•
46969 Posts
328
0
Posted October 4th, 2005 13:00