
UNSOLVED
USB Upgrade for Dell Studio XPS 435T/9000 - Windows 7
I've been trying to add USB 2.0 capability to my Dell PC. First I got a 7 Port PCI USB card adapter by StarTech.com, part #PCIUSB7. I couldn't get speeds any faster than what I had with standard USB. I know my backup external hard drive works with USB 2.0 because I've used it on other PCs and gotten the higher speeds. But I was stuck with standard USB speeds using it on my Dell.
Then I used a Dell online tool to get help. It recommended a USB 3.0 2-port PCI Express Card by VisionTek. So I ordered it from Dell and attempted to install it. Well, along with the two edge connectors that plug into then motherboard, there is a power connector on the back of the card. Unfortunately, I see no cables that will mate with it. The card also comes with an adapter cable for the power. I also see no cables in the PC that would mate with VisionTek's adapter cable.
Has anyone else had this experience? Am I just missing something?
Has anyone successfully added a USB 2.0 upgrade to their Dell Studio PC? If someone can fill me in on a card that was successfully installed, I'd be glad to purchase one and just eat the money I've spent so far.
I tried getting help from Dell but the first support person I talked to transferred me and the second one didn't seem to understand what I was asking and appeared to hang up.
Responses (2)
Solutions (0)
Hang on a nano-second...
Specs for the XPS 435T/9000 say the USB ports are all USB 2.0.
Three top-panel, one front-panel, and four back-panel USB 2.0-compliant connectors
So did you mean you've been trying to add USB 3?
If you really meant USB2, open Device Manager and see if there's one entry under USB that says USB2 Enhanced Controller. If it's there, you have USB2. If not, you may need to reinstall the USB drivers:
- Manually set a system restore point to be safe.
- Open Device Manager and right-click and uninstall all USB root hubs. Save the one connected to the mouse for last. When that's done, reboot. You may need to do a hard boot, because the mouse won't be working.
- When Win 7 boots, it should automatically reinstall the USB ports. Then look for that Enhanced entry in Device Manager.

speedstep
11 Legend
•
46969 Posts
928
1
Posted September 22nd, 2015 12:00
USB 3.0 cards usually come with SATA DRIVE POWER TO MOLEX ADAPTER cable.The ORICO Cards have this. Molex 4 pin is what was on the IDE drives from 2000 to 2006.
http://www.amazon.com/Ports-Inateck-PCI-E-Expansion-Version/dp/B00J7F4GXG